OEM Toro Snow Blower Parts & Accessories

Washer

$6.51

Fix Number: FIX8832975
Manufacturer Part Number: 107-3844

This is a genuine OEM sourced replacement part designed for use with Toro snow blowers/throwers. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the upper and lower handles together. This part is made out of metal and it is sold individually.

Primer Bulb

$9.04

★★★★★

1 Review

Fix Number: FIX9056413
Manufacturer Part Number: 66-7460

Genuine Toro replacement part, this item is sold individually. By pressing the 66-7460 Primer Bulb (a recommended 3-4 times), fuel will be forced from the float bowl into the throat of the carburetor; this will allow the engine of the snowthrower model numbers below to start.

Bearing-ball

$18.90

Fix Number: FIX8960493
Manufacturer Part Number: 38-7820

This is a Genuine Manufacturer Approved replacement part used on Toro Snowthrowers. This Ball Bearing has multiple applications in the Snowthrowers. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver and a Set of Wrenches.

Spark Plug

$6.51

Fix Number: FIX9277103
Manufacturer Part Number: 35395

This is a genuine OEM replacement part sourced directly from the manufacturer. Spark plugs are important component of the ignition system, they take energy from the battery to create and electric spark, that spark is used to ignite the fuel air mixture in your small engine. This spark plug can be used with a variety of lawn and garden equipment. It is recommended that you inspect your spark plug while you are doing regular maintenance, so you can clean and change the part when necessary. If you do not replace it often enough you may have trouble starting the engine or it may run rough. To install this part you will need a spark plug socket. Also ensure that you are properly gapping your new spark plug before installing it, check your manual for the gapping requirements.

Nut-lock, Ni

$6.55

Fix Number: FIX9276436
Manufacturer Part Number: 3296-29

This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It is used as part of the shear bolt assembly, as well as other areas in your machine. The nyloc nut has a diameter of roughly a 1/4 inch.

Ring-retaining

$6.55

Fix Number: FIX8950132
Manufacturer Part Number: 32151-61

This snap ring fits into a groove to hold a pinion gear or other drive part in place. A loose drive part may mean the ring is bent, weak, or missing. Check the groove, washers, bearings, and shaft for damage before replacing it. Confirm fit with the full machine model, serial range, and parts diagram. Turn off the equipment and disconnect the battery or spark plug lead when needed. Wear eye protection and use retaining-ring pliers. Make sure the new ring sits fully and evenly in the groove before use.

Knob-handle

$7.19

Fix Number: FIX8827606
Manufacturer Part Number: 106-4161

Genuine OEM replacement part used on Walk Behind Mowers and Snowblowers. This is a Plastic Knob with a Metal Bushing inside. Does not ship with screw or washer these parts are sold separately. Replacing this part is very easy and it does not require any additional tools.

Lawn Mower Ignition Key

$7.65

Fix Number: FIX9051002
Manufacturer Part Number: 63-8360

This replacement ignition key is sourced directly from original equipment manufacturer. It is specially designed for Toro snow blowers/throwers. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing the user to start the unit. This key is made out of metal with a plastic grip. It is sold individually.

Bracket-hanger, Rh

$16.45

Fix Number: FIX11804775
Manufacturer Part Number: 131-4138

An uneven deck or poor cut may point to a damaged rear hanger bracket. The bracket gives the deck a firm mounting and pivot point while allowing it to move over the lawn. First check for loose bolts, worn pins, bent lift arms, and cracks near the mounting holes. Match the replacement to the complete mower model and correct side. Set the parking brake, block the wheels, remove the key, and disconnect the spark plug wire. Lower and support the deck before removing the bracket, then tighten all hardware and check belt alignment before use.

Primer Body

$12.72

Fix Number: FIX8971120
Manufacturer Part Number: 44-2750

This is an authentic manufacturer sourced replacement part designed for use with Toro snow throwers/blowers. This part helps to secure the primer bulb and connect the fuel hose. It is made out of plastic and it is sold individually.

Toro Snow Blower Parts

Popular Toro Snow Blower Parts

Toro Snow Blower Appliance Types

Related Toro Snow Blower Parts

Popular Toro Snow Blower Models

Toro Snow Blower Parts

Start With Your Model Number

Popular Toro Snow Blower Parts

Toro Snow Blower Appliance Types

Related Toro Snow Blower Parts

Popular Toro Snow Blower Models