OEM Craftsman Snow Blower Parts & Accessories

Nut Lock

$6.51

Fix Number: FIX16381792
Manufacturer Part Number: 596040501

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

Nut-flglk

$6.51

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Lawn Mower Handle Knob

$11.49

Fix Number: FIX9020379
Manufacturer Part Number: 532185577

This is an OEM part sourced directly from Husqvarna. This handle knob is used on a variety of lawn and garden equipment. Commonly used in lawn mower to secure the handle, and in snow blowers to secure and adjust the angle of the chute. We do recommend that you refer to model specific diagrams for appropriate uses and applications. This handle knob is made of plastic and it is sold individually.

Shear Pin, .25

$6.51

Fix Number: FIX9110822
Manufacturer Part Number: 738-04124A

Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference List" below. This is a shear pin for your lawn and garden equipment, most commonly your snow blower. It is designed to snap if your auger gets jammed or clogged, to protect your snow blower from further damage. Because this part is meant to snap at a certain point of pressure, it is a commonly replaced part in snow blowers. Consequently, we recommend keeping a spare on hand. This Shear Pin is approximately 1.75" long, and is sold individually.

Fixes these symptoms

Auger will not turn
See more...

Lawn Mower Flanged Lock Nut

$6.51

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Lock Nut

$6.51

Fix Number: FIX16381786
Manufacturer Part Number: 596039201

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of this nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.

Pin-bow Tie Cotter

$6.51

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Installation Instructions

Laura from CANDLER, NC

The right side of the mowing deck was dragging the ground.

I identified the area and compared it to the opposite side which still had the cotter pin and place. The cotter pin on the right side had been lost in the mowing process. I used pliers to attach the new pin and all is well! Super glad to find a website that carries all parts for my dad's mower. He has dementia and can't remember where the manual is so I was glad to find fix.com. Read more...

Snow Blower Drive Belt

$26.72

Fix Number: FIX8891963
Manufacturer Part Number: 1733324SM

This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. This is a genuine part, designed to be an exact replacement for the original. It connects the engine pulley to the transmission pulley, which is what drives the snowblower. This belt is made of a durable rubber material, but like all belts, will wear over time and require replacement.

Fixes these symptoms

Auger will not turn
Drive system does not work
See more...

Shear Bolt 1/4-20x1-3/4

$6.51

Fix Number: FIX16376414
Manufacturer Part Number: 588077502

Bolt, Shoulder Shear, 1/4-20 X 1-13/16

Snow Blower Auger Cable

$30.57

Fix Number: FIX12685355
Manufacturer Part Number: 946-04230B

This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or damaged cable originally installed on new units and plays a vital role in engaging the auger for proper snowblower operation. Made with high-quality rubber insulation, this durable component is sold individually. Please note that the housing, trigger, and hardware are not included and must be purchased separately. For proper installation, refer to your model’s diagram, and be prepared to use tools such as pliers and a wrench set.

Fixes these symptoms

Auger / blower won't engage
Auger will not turn
See more...

Craftsman Snow Blower Parts

Popular Craftsman Snow Blower Parts

Installation Instructions

Craftsman Snow Blower Appliance Types

Related Craftsman Snow Blower Parts

Popular Craftsman Snow Blower Models

Craftsman Snow Blower Parts

Start With Your Model Number

Popular Craftsman Snow Blower Parts

Installation Instructions

Craftsman Snow Blower Appliance Types

Related Craftsman Snow Blower Parts

Popular Craftsman Snow Blower Models