OEM Husqvarna Pole Saw Parts & Accessories

Trimmer Hose

$6.95

Fix Number: FIX9020992
Manufacturer Part Number: 537042401

This is a hose for your lawn and garden equipment. It is just over 4 inches long, and made of a strong, and durable plastic. The hose is connected to the air purge bulb and the carburetor, and may be called a fuel hose. If you use your machine often, this part will deteriorate and crack, allowing fuel to leak out. If your line is damaged it should be replaced right away. This hose could also be used as the return fuel line.

Fuel Hose

$18.65

Fix Number: FIX17016374
Manufacturer Part Number: 581756205

This is a genuine manufacturer sourced replacement part designed for use with Husqvarna chainsaws, brushcutters and hedge trimmers. This is the hose that delivers fuel from the tank to the engine. It is made out of rubber and it is sold individually. Please note fuel filter is sold separately.

Air Filter

$9.79

Fix Number: FIX9022665
Manufacturer Part Number: 537143101

This genuine Husqvarna replacement part is designed for a variety of handheld lawn and garden equipment. Air filter helps to prevent dust and debris from entering the carburetor and engine. When replacing filter you can open the package it comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil. This will help to trap small particles. This filter is made out of foam material and it is sold individually. To replace it you would need a wrench • Remove knob and a blot that secure filter cover • Remove cover and replace filter element • Reassemble and test the unit

Trimmer Starter Pawl Bridge

$35.15

Fix Number: FIX9282878
Manufacturer Part Number: 503873305

This is an authentic starter pawl bridge which is sourced directly from original manufacturer. This item provides the resistance needed for the starter rope to start the trimmer. It is made out of metal and it is sold individually.

Installation Instructions

Robert from Belmont, NC

plastic pawls broken no start

remove black cover with 4 screws Then remove 2 long and 1 short screw of pull cord housing Then 4 longer screws that house cover over pawl Hold shaft with vise grip or channel lock pliers then with another set of plier turn off old pawl to the left Nut is welded on so don't use the nut easier to install Read more...

Chainsaw Primer Bulb

$30.75

Fix Number: FIX9282918
Manufacturer Part Number: 503936601

This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your machine to help start the engine.

Fuel Tank Bushing

$6.55

Fix Number: FIX11824288
Manufacturer Part Number: 580457501

Genuine Husqvarna replacement part, this item is sold individually. The purpose of the Fuel Tank Bushing is to create a seal and prevent leaks from the fuel tank. The fuel line are inserted in to the Bushing. It is then pressed into the holes provided in the fuel tank.

Pump Cylinder

$17.55

Fix Number: FIX9287945
Manufacturer Part Number: 537154801

This is a genuine OEM part. The Husqvarna pump cylinder is compatible with many chainsaw devices. The metal item connects the pump piston to the oil hose in the clutch pump. A pair of pliers and a hex key may be necessary for making the replacement. The pump cylinder is sold individually.

O-ring

$6.95

Fix Number: FIX9287967
Manufacturer Part Number: 537184901

This is an authentic replacement part assembled by original manufacturer. It is used in various Husqvarna power tools. An O-ring is used to seal and buffer two connecting parts in order to prevent leakage and loss of pressure. They are often necessary for the machine to work. Be sure that the correct size/shape of O-ring is being used in correct position. Sold individually.

Knob

$7.65

Fix Number: FIX8993624
Manufacturer Part Number: 502204001

This is a genuine manufacturer sourced replacement part designed for use with Husqvarna power tools. This knob helps to secure the air filter cover. Replacing this part does not require any tools, this knob is secured with a bolt (sold separately). This knob is made out of plastic and it is sold individually. You will need a wrench to replace this item.

Installation Instructions

William from Washington, ME

screw a bit too short to engage internal threads in trimmer.

Used the belt sander to grind down two raised portions; one on the underside of the know, the other on the top of the filter cover. Read more...

Carburetor

$98.95

Fix Number: FIX11824881
Manufacturer Part Number: 588171156

This is a genuine OEM sourced replacement part used on Husqvarna trimmers and brushcutters. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This is a metal body carburetor, it is sold individually. When replacing carburetor it is advised that you also replace gaskets to ensure proper air tight seal for optimum performance. You will need a screwdriver to perform this repair.

Husqvarna Pole Saw Parts

Popular Husqvarna Pole Saw Parts

Installation Instructions

Installation Instructions

Husqvarna Pole Saw Appliance Types

Related Husqvarna Pole Saw Parts

Popular Husqvarna Pole Saw Models

Husqvarna Pole Saw Parts

Start With Your Model Number

Popular Husqvarna Pole Saw Parts

Installation Instructions

Installation Instructions

Husqvarna Pole Saw Appliance Types

Related Husqvarna Pole Saw Parts

Popular Husqvarna Pole Saw Models