Tanaka Leaf Blower / Vacuum Parts

This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel line together. Place the return fuel line inside the grommet and install both into the fuel tank.

This primer bulb is used to draw extra fuel into the carburetor, allowing the engine to easily start. The primer bulb fits various power tools and is sold individually. When the purge bulb is pressed it will force fuel into the fuel line from the fuel tank, ultimately leading it into the carburetor. When the carburetor is full with fuel, the excess will go back into the tank, specifically in the fuel return line. With use and wear, the primer cracks or loses elasticity, then it is important to replace this part. Refer to the manual provided by the manufacturer.

This is a pipe fuel assembly for a variety of lawn and garden equipment. This pipe is also known as a fuel line, and it is 160mm long by 5mm wide. This part feeds the carburetor with fuel by connecting it to the fuel filter inside of the fuel tank. Before making this installation, we recommend draining the fuel from your machine, and removing the spark plug.

This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

This is a clip, but you may also know it as a ring, and it is for your lawn and garden equipment. This part has a 6.3mm diameter and is made of metal. It is sold individually. The clip is most often used to hold tubes and hoses in place.