Yard Man Lawn Tractor Parts

Yard Man Appliance Parts
Shop By Appliance Type

Popular Yard Man Lawn Tractor Parts

  In Stock
Nut, Flange Lock, 5/16-18, Grf
Fix Number FIX9092936
Manufacturer Part Number 712-04063
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.
Installation Instructions
Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop!
  In Stock
Fix Number FIX9310468
Manufacturer Part Number 925-1745A
  In Stock
Nut, Flange Lock, 3/8-16, Grf
Fix Number FIX9095080
Manufacturer Part Number 712-04065
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.
  In Stock
Nut, Flange Lock, 1/4-20, Grf
Fix Number FIX9299574
Manufacturer Part Number 712-04064
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.
  In Stock
Washer-Lock 5/16
Fix Number FIX9311087
Manufacturer Part Number 936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following appliances: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
  In Stock
Hex Flange Nut 5/8-18 Thd.
Fix Number FIX10003369
Manufacturer Part Number 712-0417A
This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a washer to ensure the nut fastens to the components surface proportionately. If it has been removed when doing repairs or taking components apart, it should be replaced, and never re-used. All the nuts on your equipment should be inspected and tightened at least annually. To remove this hex flange nut, you will need a 15/16-inch socket. The torque spec for this nut is 70-90 ft-lbs.
  In Stock
Bearing, Flange, .760 X .941 X 1.0
Fix Number FIX9122043
Manufacturer Part Number 741-0660A
This is a manufacturer-approved replacement flange bearing for a lawn tractor. It is sold individually. The function of this part is to help secure the axle assembly to the pivot axle. It also allows the axle to move with ease. This part is designed to handle constant use and pressure, but it is prone to wear over time, so should be checked consistently and replaced when it starts to wear.
  In Stock
Steering Pinion Gear
Fix Number FIX9108026
Manufacturer Part Number 717-1554
This part contains one steering pinion gear for a lawn tractor. It is part of the steering mechanism and is highly prone to wear and tear. If this pinion gear becomes stripped it can cause steering to be impossible. This genuinely-sourced part is designed to be an exact replacement for the original.
  In Stock
Hex Flange Bearing, 5/8
Fix Number FIX9311603
Manufacturer Part Number 941-0656A
This part includes one hex flange bearing for a lawn tractor. It is sourced directly from the original manufacturer. Its purpose is to connect the steering shaft to the frame of the lawn tractor. It has an approximate inside diameter of 0.63-inches. You may require a screwdriver, pliers, socket set, and torx bit for this repair.
  In Stock
Bell. Wash. .340 I.D. x .872 O.D.
Fix Number FIX10006541
Manufacturer Part Number 736-0242
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.

Appliance Type

Popular Yard Man Lawn Tractor Models