OEM Toro Lawn Tractor Parts & Accessories

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Lawn Mower Flanged Lock Nut

$6.51

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Lawn Mower Idler Pulley

$42.85

Fix Number: FIX11812944
Manufacturer Part Number: 753-08171

Genuine OEM Idler Mandrel Pulley Kit which includes: pulley, spacer/washer and a bushing. This part spins the blade on the mower deck of the tractor. The bearing for this pulley is not sold separately. If part is damaged or the bearing inside of it is not spinning freely then this part needs to be replaced.

Nut-flglk

$6.51

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Nut-lock, Ni

$6.55

Fix Number: FIX9276436
Manufacturer Part Number: 3296-29

This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It is used as part of the shear bolt assembly, as well as other areas in your machine. The nyloc nut has a diameter of roughly a 1/4 inch.

Deflector-discharge

$76.32

Fix Number: FIX16665209
Manufacturer Part Number: 138-7502

Designed for select Toro and Exmark zero-turn mowers, this discharge deflector helps control grass and debris flow from the mower deck. It improves safety by directing clippings away from the operator and bystanders, and supports a cleaner mowing experience. Made from durable materials, it installs easily onto compatible mower decks.

Lawn Mower Variable-Speed Belt

$59.43

★★★★★

1 Review

Fix Number: FIX9186148
Manufacturer Part Number: 954-0467A

This is a Genuine replacement Belt designed for use with Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the the Belt that drives your unit. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Loosen the transaxle pulley • Relieve tension on the upper drive belt • Remove the upper drive belt and lawn mower belt guide • Secure the new belt • Reassemble and tighten the pulleys

Lawn Mower Key

$21.95

Fix Number: FIX9310468
Manufacturer Part Number: 925-1745A

Cover-belt

$14.13

★★★★★

1 Review

Fix Number: FIX16666009
Manufacturer Part Number: 144-1906

Hi-lift Blade

$25.10

Fix Number: FIX8844232
Manufacturer Part Number: 115-5059-03

This is a genuine replacement blade which is supplied directly from the original equipment manufacturer for use with Toro lawn mowers. A high-lift blade is a unique style of blade designed with larger wind wings which will increase the airflow and aid in bagging grass clippings. Over time the blade may wear out or get damaged eventually requiring replacement to maintain a clean cut lawn. It is a high-quality component which is made of durable metal and it is sold individually.

Toro Lawn Tractor Parts

Popular Toro Lawn Tractor Parts

Installation Instructions

Toro Lawn Tractor Appliance Types

Related Toro Lawn Tractor Parts

Popular Toro Lawn Tractor Models

Toro Lawn Tractor Parts

Start With Your Model Number

Popular Toro Lawn Tractor Parts

Installation Instructions

Toro Lawn Tractor Appliance Types

Related Toro Lawn Tractor Parts

Popular Toro Lawn Tractor Models