Official Snapper Lawn Tractor Hardware

Washer, Thrust

$7.60

Fix Number: FIX9070364
Manufacturer Part Number: 7014523YP

This thrust washer is an authentic item which is supplied by the original manufacturer for Murray and Snapper lawn mowers. It is a special type of washer that will resist torque applied by the bearing while ensuring a tight fit. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This thrust washer is made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and application.

Snow Blower Shear Pin

$6.51

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Lawn Mower Spindle Blade Washer

$12.79

Fix Number: FIX9266914
Manufacturer Part Number: 1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Nut, Push

$6.51

Fix Number: FIX16431884
Manufacturer Part Number: 771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

Lawn Mower Nut

$8.33

Fix Number: FIX9999668
Manufacturer Part Number: 703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Lawn Mower Hex Head Washer Screw

$7.21

Fix Number: FIX8943581
Manufacturer Part Number: 2828635SM

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

WASHER, Hex, 11/16 x 2

$7.60

Fix Number: FIX8888820
Manufacturer Part Number: 1713089SM

This replacement hex washer is an authentic component which is supplied directly from the original equipment manufacturer, it is specially designed for use with Snapper and Simplicity lawn mowers. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. This high-quality part is made of durable metal material and is sold individually.

Pin, 3/32 X 1.6

$6.51

Fix Number: FIX9999596
Manufacturer Part Number: 703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Bolt-wheel 3/8-16x2.7

$8.83

Fix Number: FIX8915711
Manufacturer Part Number: 2108765SM

This genuine OEM replacement part is sourced directly from original manufacturer for use with lawn mower and garden tractors. This bolt helps to secure the deck wheel which supports mower deck and allows it to move freely. This hex head bolt is sold individually and would require a wrench for installation.

Key-flywheel

$6.51

Fix Number: FIX8925657
Manufacturer Part Number: 222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Snapper Lawn Tractor Hardware

Popular Snapper Lawn Tractor Hardware

Related Snapper Lawn Tractor Parts

Snapper Lawn Tractor Hardware

Start With Your Model Number

Popular Snapper Lawn Tractor Hardware

Related Snapper Lawn Tractor Parts