OEM Snapper Lawn Tractor Parts & Accessories

Hose, Fuel

$9.85

Fix Number: FIX16439931
Manufacturer Part Number: 791766

Bearing, Ball 11/16x1

$9.85

Fix Number: FIX8887153
Manufacturer Part Number: 1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Wheel

$8.09

Fix Number: FIX9265642
Manufacturer Part Number: 1714760SM

This authentic OEM sourced replacement wheel is specially designed for use with Snapper, Simplicity and Murray lawn mowers and tractors. It is the wheel for the mower deck, it will help to support its weight and assist in turning. This wheel is made out plastic material and it is sold individually. Replacing this deck wheel is a simple task that should only require a set of wrenches.

ROLLER

$13.77

Fix Number: FIX18586796
Manufacturer Part Number: 1668513SM

This item has been sourced from the original manufacturer and is intended to be used with riding lawnmowers from Snapper and Simplicity. The roller attaches to the mower's deck and is used to aid in allowing the deck to move over the lawn without gouging into the ground. This item is sold as an individual item.

Lawn Mower Friction Ring

$56.01

Fix Number: FIX9304113
Manufacturer Part Number: 7600135YP

Inside some rear-engine riding mowers, a friction ring helps the clutch transfer power smoothly into the drive system. A glazed, cracked, bent, or badly worn ring can cause delayed movement, slipping, uneven takeoff, or loss of drive even while the engine runs normally. Check tire pressure, belt condition, cable adjustment, and the mating drive plate before choosing a replacement. Oil on the ring can also reduce grip. Match the replacement to the full equipment model and product number. Before service, turn off the engine, remove the key, disconnect starting power, and support the mower safely. Clean the contact area and follow the service diagram during installation.

Snow Blower Shear Pin

$6.51

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Washer, Thrust

$7.02

Fix Number: FIX9070364
Manufacturer Part Number: 7014523YP

This thrust washer is an authentic item which is supplied by the original manufacturer for Murray and Snapper lawn mowers. It is a special type of washer that will resist torque applied by the bearing while ensuring a tight fit. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This thrust washer is made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and application.

Lawn Mower Nut

$7.69

Fix Number: FIX9999668
Manufacturer Part Number: 703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine depending on appliance. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Lawn Mower Spindle Blade Washer

$11.58

Fix Number: FIX9266914
Manufacturer Part Number: 1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Lawn Mower Wing Knob

$9.91

Fix Number: FIX9999469
Manufacturer Part Number: 703065

This knob is used on a variety of lawn and gardening equipment and acts as a nut to fasten bolts and stayed secure in your tool. Replace this part if your bolt is loose and needs security. The diameter is 5/16 inches and the thread count is 18. *Please note: this knob is sold individually. Check diagram provided by the manufacturer for the part location and installation instructions.

Snapper Lawn Tractor Parts

Popular Snapper Lawn Tractor Parts

Snapper Lawn Tractor Appliance Types

Related Snapper Lawn Tractor Parts

Popular Snapper Lawn Tractor Models

Snapper Lawn Tractor Parts

Start With Your Model Number

Popular Snapper Lawn Tractor Parts

Snapper Lawn Tractor Appliance Types

Related Snapper Lawn Tractor Parts

Popular Snapper Lawn Tractor Models