OEM Husky Lawn Tractor Parts & Accessories

Nut-flglk

$6.51

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Lawn Mower Key

$21.95

Fix Number: FIX9310468
Manufacturer Part Number: 925-1745A

Lawn Mower Flanged Lock Nut

$6.51

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Lawn Mower Idler Pulley

$42.85

Fix Number: FIX11812944
Manufacturer Part Number: 753-08171

Genuine OEM Idler Mandrel Pulley Kit which includes: pulley, spacer/washer and a bushing. This part spins the blade on the mower deck of the tractor. The bearing for this pulley is not sold separately. If part is damaged or the bearing inside of it is not spinning freely then this part needs to be replaced.

Cable-engage W/sea

$32.41

★★★★★

1 Review

Fix Number: FIX11813377
Manufacturer Part Number: 946-05124A

This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the replacement. This part is sold individually.

Fixes these symptoms

Deck blades will not turn
See more...

Cable:engagement D

$77.02

Fix Number: FIX10033928
Manufacturer Part Number: 946-04173E

This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wire cable, a rubber cover and an extension spring on one end and a Z-bend on the other. The cable casing length is approximately 39-inches and the inner wire length is about 56-inches.

Lawn Mower Belt

$54.12

Fix Number: FIX10035504
Manufacturer Part Number: 954-05040

This ground drive belt is for lawn tractors. The ground drive belt turns the transmission pulley to move the tractor.

Pin-bow Tie Cotter

$6.51

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Installation Instructions

Laura from CANDLER, NC

The right side of the mowing deck was dragging the ground.

I identified the area and compared it to the opposite side which still had the cotter pin and place. The cotter pin on the right side had been lost in the mowing process. I used pliers to attach the new pin and all is well! Super glad to find a website that carries all parts for my dad's mower. He has dementia and can't remember where the manual is so I was glad to find fix.com. Read more...

2-in-1 Blade

$37.49

Fix Number: FIX16463287
Manufacturer Part Number: 942-04308A

This mower blade is designed for use on 42-inch cutting decks and supports efficient grass cutting for bagging or side-discharge applications. Its durable construction and balanced design help deliver a clean, even cut while maintaining smooth operation during mowing. Replacing a worn or damaged blade restores cutting performance, improves lawn appearance, and helps ensure reliable, consistent operation of the mower throughout the season.

Husky Lawn Tractor Parts

Popular Husky Lawn Tractor Parts

Installation Instructions

Installation Instructions

Husky Lawn Tractor Appliance Types

Popular Husky Lawn Tractor Models

Husky Lawn Tractor Parts

Start With Your Model Number

Popular Husky Lawn Tractor Parts

Installation Instructions

Installation Instructions

Husky Lawn Tractor Appliance Types

Popular Husky Lawn Tractor Models