Weed Eater Lawn Mower Control Cables

Fix Number

FIX9015022

Manufacturer Part Number

532183567

This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Fix Number

FIX9014267

Manufacturer Part Number

532183281

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.

Fix Number

FIX11823619

Manufacturer Part Number

532424983

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman Lawn Mowers and Lawn Tractors. The engine zone control cable stops the engine when you let go of the handle. The most common reason for replacing the engine zone control cable is if it is broken, causing the brake to not release even when the lever is pressed. This part is sold individually. The tool that you will need for this repair is Pliers.

Fix Number

FIX9016384

Manufacturer Part Number

532194653

This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip. Replacing this cable is a simple task that may require pliers. • First you want to see where the old cable is attached • Just remove one cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)

★★★★★

★★★★★

1 Review

Fix Number

FIX9013227

Manufacturer Part Number

532176556

This part is an OEM from Craftsman for use with Craftsman Lawn Mowers. The engine zone control cable stops the engine when you let go of the handle. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed. This part is sold individually. The tool that you will need to replace the engine zone control cable is pliers.

Fix Number

FIX12609193

Manufacturer Part Number

582991501

Genuine OEM replacement part, this item is sold individually. The Engine Control Cable connects to the Control Bar and to the Engine. The Control Bar has to be pulled up for the Engine to start. Once you let go of the Control Bar the Engine Control Cable will cause the Engine to stop running.

★★★★★

★★★★★

1 Review

Fix Number

FIX9286772

Manufacturer Part Number

532181699

This drive control cable is a high quality replacement part that is sourced from original equipment manufacturer for use on high wheeled trimmers. The control cable stops the blade when the control handle is released, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note one durable rubber insulated cable is included per order.

Fix Number

FIX9974194

Manufacturer Part Number

532440934

This is a genuine OEM sourced part that is specially made for use with Husqvarna and Weed Eater lawn mowers. It is the cable that stops the blade when the control handle is released. Unfortunately, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.

Fix Number

FIX12658052

Manufacturer Part Number

532168552

It is an authentic OEM sourced replacement part which is specially produced for use with Weed Eater and Poulan walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. It is a high-quality rubber insulated component which is sold individually.

Fix Number

FIX12604727

Manufacturer Part Number

532162778

The engine zone control cable stops the blade when the control handle is released on walk-behind lawn mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. This is a genuine OEM sourced replacement part that is designed for use with lawn mowers. Please note this durable metal rubber insulated cable is sold individually.