Simplicity Lawn Mower Hardware

Fix Number

FIX16431884

Manufacturer Part Number

771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

Fix Number

FIX8888820

Manufacturer Part Number

1713089SM

This replacement hex washer is an authentic component which is supplied directly from the original equipment manufacturer, it is specially designed for use with Snapper and Simplicity lawn mowers. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. This high-quality part is made of durable metal material and is sold individually.

Fix Number

FIX8925657

Manufacturer Part Number

222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Fix Number

FIX9266914

Manufacturer Part Number

1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Fix Number

FIX9064541

Manufacturer Part Number

691108

This is an authentic OEM sourced replacement part that is intended to be used with lawnmower engines and outboard motors from Briggs & Stratton and Toro. The metal screw is used to secure the rocker cover to the cylinder head assembly. This item is available as an individual replacement part.

Fix Number

FIX16443498

Manufacturer Part Number

84001963

This is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is one of the screws for the cylinder head, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Fix Number

FIX8940580

Manufacturer Part Number

271716

This authentic OEM sealing washer is designed for your lawn equipment to create a tight seal within the carburetor body, preventing fuel or air leaks. If you notice any signs of leaks, such as dripping fuel or hissing sounds, it may indicate a faulty or worn-out sealing washer. Additionally, you might be experiencing engine performance issues like rough idling or difficulty starting. To replace the sealing washer, ensure that the machine is off and that the engine has cooled down. Remove the air breather cover and the filter itself, following the instructions provided in your user manual to access the carburetor. Depending on your specific equipment model, you may need to detach the springs from the carburetor choke mechanism, disconnect the fuel line and fuel tank, remove the choke lever, and detach the air breather base. Once you have located the carburetor, carefully unthread the main jet from the bottom of the carburetor bowl. Finally, slide off the old sealing washer, ensuring you take note of its positioning for accurate replacement. Please note that this sealing washer is sold individually.

Fix Number

FIX9265686

Manufacturer Part Number

1715724SM

This is a genuine OEM sourced replacement spacer that is specially produced for use with Snapper and Simplicity lawn and garden equipment. This spacer is used in the mower deck assembly for the mandrel assembly, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. It is a high-quality component which is made of durable metal and it is sold individually.

Fix Number

FIX8891426

Manufacturer Part Number

1732544SM

This is an authentic replacement part manufactured for use with riding lawnmowers. The metal spacer is found on the top side of the deck and used to provide space between the bearings on the spindle so the pulley is held at the correct height. This spacer is sold as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX9999468

Manufacturer Part Number

703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.