Poulan Lawn Mower Control Cables

Fix Number

FIX9015022

Manufacturer Part Number

532183567

This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Fix Number

FIX9018907

Manufacturer Part Number

532427497

This is a genuine Craftsman part for use with Lawn Mowers. The zone control cable stops the engine when you let go of the handle. This part is sold individually. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed. The tool that you will need to replace the zone control cable is pliers.

Fix Number

FIX9019323

Manufacturer Part Number

532435111

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.

Fix Number

FIX12662045

Manufacturer Part Number

584243501

This clutch cable connects the engagement lever to the mower deck, allowing you to activate the blades when needed. Built with a durable steel inner wire and protective outer casing, it provides reliable operation and consistent tension. Replacing a worn or damaged cable can restore proper blade engagement and ensure smooth, dependable performance.

Fix Number

FIX9013361

Manufacturer Part Number

532175067

This is an authentic manufacturer sourced replacement part used on lawn mowers/tractors. It connects the mower engagement lever to the idler arm on the mower deck and allows you to engage and disengage the blades. Includes bold and the zip tie. You may need Pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Fix Number

FIX9014267

Manufacturer Part Number

532183281

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.

Fix Number

FIX9973566

Manufacturer Part Number

532408047

This is an authentic Husqvarna replacement part manufactured for use with walk-behind lawnmowers. The cable is used to link the bail and the engine and is used to keep the mower running while the bail is pressed to the handle and stops the engine when the bail is released. This cable is sold as an individual replacement part.

Fix Number

FIX11823619

Manufacturer Part Number

532424983

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman Lawn Mowers and Lawn Tractors. The engine zone control cable stops the engine when you let go of the handle. The most common reason for replacing the engine zone control cable is if it is broken, causing the brake to not release even when the lever is pressed. This part is sold individually. The tool that you will need for this repair is Pliers.

Fix Number

FIX9016384

Manufacturer Part Number

532194653

This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip. Replacing this cable is a simple task that may require pliers. • First you want to see where the old cable is attached • Just remove one cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)

Fix Number

FIX12661837

Manufacturer Part Number

588479201

This is a genuine Poulan part for use with Lawn Mowers. The drive control cable engages the gear case to drive the lawn mower. The most common reason for replacing the drive control cable is if it is broken, causing the brake to not release even when the lever is pressed. This part is sold individually. The tool that you will need to replace the drive control cable is pliers.