Official Cub Cadet Lawn Mower Hardware

Pin-bow Tie Cotter

$6.25

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Nut-flglk 5/16-18

$6.25

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Screw

$6.32

Fix Number: FIX12664831
Manufacturer Part Number: 710-04995A

This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.

Lawn Mower Self-Tapping Screw

$6.25

★★★★★

1 Review

Fix Number: FIX9086265
Manufacturer Part Number: 710-04484

This is a self-tapping screw for your lawn equipment. It has multiple applications, and is made of durable metal. This part is sold individually. To install this screw, you will need a wrench. The major diameter is 5/16-inches, with 18 threads, and 3/4-inches long.

Lawn Mower Flanged Lock Nut

$6.25

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Lawn Mower Hex Washer Head Screw

$6.25

Fix Number: FIX9298768
Manufacturer Part Number: 710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)

$6.25

Fix Number: FIX9088496
Manufacturer Part Number: 710-1044

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

Lawn Mower Key

$23.88

Fix Number: FIX9310468
Manufacturer Part Number: 925-1745A

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.25

Fix Number: FIX9298671
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Use 712-0417a

$9.76

Fix Number: FIX9105840
Manufacturer Part Number: 712-0417A

This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a washer to ensure the nut fastens to the components surface proportionately. If it has been removed when doing repairs or taking components apart, it should be replaced, and never re-used. All the nuts on your equipment should be inspected and tightened at least annually. To remove this hex flange nut, you will need a 15/16-inch socket. The torque spec for this nut is 70-90 ft-lbs.

Cub Cadet Lawn Mower Hardware

Popular Cub Cadet Lawn Mower Hardware

Related Cub Cadet Lawn Mower Parts

Cub Cadet Lawn Mower Hardware

Start With Your Model Number

Popular Cub Cadet Lawn Mower Hardware

Related Cub Cadet Lawn Mower Parts