Cub Cadet Lawn Mower Carburetors

Carburetor Overhaul Kit This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Diaphragm-Carburetor

Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP This is an OEM primer bulb and clip. It is attached to the engine air filter base. When the primer bulb is pushed, this fills the carburetor with fuel, making it easier to start a cold engine. This rubber primer bulb is known to harden and crack over time. For this repair you will start by removing the motor cover, air filter cover, air filter, and then the primer base. You will then use a screwdriver to release the clip holding the primer bulb in place. To install the new primer bulb, place the new clip so the ears are facing out, and then line the ears up with the openings on the base. You will then use your screwdriver to help snap it into place.

Kit-Needle/Seat

Bowl-Float

Diaphragm-Carburetor

Primer-Carburetor

Carburetor This is an Authentic OEM replacement part used on Lawn and Garden Engines. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This Assembly includes a Metal Body Carburetor, Rubber O-Ring and a Gasket. When replacing Carburetor it is advised that you also replace Carburetor Gaskets to ensure proper Air Tight Seal for optimum performance. You will need a Screwdriver to perform this repair.

Float-Carburetor

Valve-Float Needle