Cub Cadet Lawn Mower Starters

Cub Cadet Appliance Parts

Popular Cub Cadet Lawn Mower Starters

Motor Starter
$143.85
Special Order
Fix Number
FIX11829347
Manufacturer Part Number
593934
This authentic manufacturer sourced replacement part is designed for use with lawn and garden engines. The starter motor provides an initial motion, engage the flywheel to start the engine. This starter motor features a 14 tooth metal gear. To complete this repair you would need a wrench.
Fix Number
FIX8981884
Manufacturer Part Number
497680
This authentic OEM starter assembly is designed for use with lawn and garden engines and is sourced directly from the original manufacturer to ensure quality and compatibility. The assembly includes a durable plastic shroud/housing, starter pulley, recoil spring, pull rope with grip, and the necessary hardware for installation. It functions as the primary mechanism for manually cranking and starting the engine. To complete the replacement, you’ll need a wrench. Simply remove the four screws and nuts securing the old starter assembly, then install the new one using the included hardware. This item is sold as a complete individual assembly.
Fixes these symptoms
  • Cannot pull starter cord out or engine will not turn over
  • See more...
Starter-rewind
$106.60
On Order
Fix Number
FIX9983435
Manufacturer Part Number
591606
This rewind starter is an authentic OEM sourced item that is specially made for Briggs and Stratton engines. This is the starter assembly that is used to pull-start the unit. It is a complete assembly which includes a plastic shroud, starter pulley, recoil spring, grip, the pull rope with a grip and the hardware secure this assembly. To complete this repair you will need a wrench.
Gear-pinion
$7.18
In Stock
Fix Number
FIX9066374
Manufacturer Part Number
695708
This is a manufacturer approved starter pinion gear designed for use with lawn and garden equipment engines. This Starter pinion gear is attach to the starter clutch drive and engages the flywheel to start the engine. It is made out of Plastic and Aluminum and it is Sold Individually.
Pulley-starter
$15.80
In Stock
Fix Number
FIX8942071
Manufacturer Part Number
295871
This starter pulley, also known as a recoil starter pulley, is sourced from the original manufacturer for use in outdoor power equipment. It includes the starter rope and plastic spool to hold the rope. Over time the rope may fray, tear, or the plastic spool may break. A faulty starter pulley will lead to difficulties pulling and retracting the rope, and starting the equipment. To replace the faulty parts, ensure the equipment is off and disconnected from power. Remove the starter housing/cover and remove the old spool and rope. Wind the rope around the new spool and tie a knot to secure it in place. Place the new spool and rope inside the starter mechanism and feed the end of the rope out of the hole in the housing. Reattach the starter cover to complete the repair.
Stator Kit
$83.52
On Order
Fix Number
FIX9272440
Manufacturer Part Number
237878-S
This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.
Clutch-starter
$37.32
In Stock
Fix Number
FIX8968281
Manufacturer Part Number
399671
This starter clutch is an authentic OEM replacement part used in small outdoor power engines. Each package includes one clutch and one ball bearing. The starter clutch allows the engine to start by engaging the crankshaft to spin the engine and initiate combustion. Once the engine starts the clutch disengages to prevent over spinning. Over time the clutch may fail due to worn-down bearings, or damage to the clutch body, resulting in hard starting or failure to start. To replace it, first, disconnect the spark plug for safety. Then, remove the engine cover to access the starter clutch. Remove the clutch from the crankshaft, and thoroughly clean the mounting shaft. Install the new clutch by screwing it onto the crankshaft, then reassemble the engine cover and reconnect the spark plug.
Rope-starter
$6.39
In Stock
Fix Number
FIX9077634
Manufacturer Part Number
697316
This manufacturer approved replacement part is a genuine starter rope. It is specially designed for use with small engines installed on lawn and garden equipment. This rope allow user to to crank start the engine. Includes one (1) fabric rope. Please note the grip/handle is sold separately.
Recoil Starter Assembly
$35.99
In Stock
Fix Number
FIX17016325
Manufacturer Part Number
28400-ZL8-033ZA
This replacement recoil starter assembly is commonly used with small Honda engines. This is the starter assembly that is used to pull start the unit. It is a complete assembly that includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws to attach this assembly are sold separately. Replacing this starter assembly is a simple task that should only require a screwdriver. • Make sure to disconnect the spark plug • Remove housing screws • Separate the old housing from the unit • Secure the new housing with the screws • Reattach spark plug and test the equipment
Pawl-recoil Starter
$6.13
In Stock
Fix Number
FIX8860066
Manufacturer Part Number
13165-2092
This part is available individually and is made of plastic. The recoil starter pawl goes next to the snap ring. A set of pliers might be helpful during the installation of this part. It may become broken and will need to be replaced. This is a genuine item that is supplied by the original equipment manufacturer for use with Kawasaki 4 stroke engines.

Related Cub Cadet Lawn Mower Parts