Lawn Mower Belts

Fix Number

FIX16380739

Manufacturer Part Number

592855201

This is a genuine OEM replacement part, sold individually. V-belt drive systems, also called friction drives (because power is transmitted as a result of the belt's adherence to the pulley) transmit power from a drive to a driven shaft. They are easy to install, require no lubrication, and dampen shock load. It is compatible with the mowers and lawn tractors listed below.

Fix Number

FIX9982769

Manufacturer Part Number

584453101

This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring replacement. You may need a wrench when replacing this part. This item is sold individually

Fix Number

FIX11813755

Manufacturer Part Number

954-04060C

This is a Genuine Manufacturer Approved replacement V-Belt used on Riding Lawn Mowers. This part is made out of Rubber and it is sold individually. This is the Belt that drives the Blades. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

Fix Number

FIX11804555

Manufacturer Part Number

121-5765

This is a single V-belt for a lawnmower. It is sourced directly from the original manufacturer, ensuring the highest quality replacement part. It measures approximately 1/2-inch wide and 30-1/2-inches long. It is the upper belt off the engine pulley. It goes from the engine drive shaft pulley to the deck, and drives the deck belt. Belts are prone to wear and will need to be replaced periodically.

Fix Number

FIX17016841

Manufacturer Part Number

598559101

This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serves as a direct replacement for a worn or missing original part. It plays a critical role in the mower’s operation by transferring power to rotate the blades, ensuring consistent cutting performance. Over time, belts can wear, crack, or stretch, leading to reduced efficiency or complete failure. Replacing the drive belt restores proper function and helps maintain the longevity of your equipment. For accurate installation and compatibility, please consult your model’s owner’s manual and parts diagram to verify the correct location and application of this component.

Fix Number

FIX9011522

Manufacturer Part Number

532144959

This is a drive belt for a lawn tractor or lawn mower. The belt is designed to turn the pulley that spins the blades on the mower deck. If the blade is not turning correctly, it could be due to a worn belt. This OEM rubber drive belt measures approximately 95-Inches long and 1/2-Inch wide, however keep in mind that a used belt may measure differently due to stretching. For this repair you will need a wrench set.

★★★★★

★★★★★

1 Review

Fix Number

FIX9186148

Manufacturer Part Number

954-0467A

This is a Genuine replacement Belt designed for use with Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the the Belt that drives your unit. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Loosen the transaxle pulley • Relieve tension on the upper drive belt • Remove the upper drive belt and lawn mower belt guide • Secure the new belt • Reassemble and tighten the pulleys

Fix Number

FIX11804435

Manufacturer Part Number

120-9470

This is an original manufacturer-sourced replacement part which is made for use with Toro lawn mowers. It is the lower drive belt that connects the engine crankshaft pulley to the transmission pulley. Over time it may wear out and stretch eventually requiring a replacement. Make sure to clean the pulleys before installing the new belt to ensure top performance and longevity with the new belt. One durable rubber traction v-belt is included. Note, the upper belt is sold separately. Refer to the appropriate diagrams of your model for the correct installation of the new component.

Fix Number

FIX11824864

Manufacturer Part Number

587686701

This drive belt 54 is a genuine manufacturer sourced replacement part. This is the main deck belt that rotates the blades on riding lawn mowers/tractors. Over time this belt will stretch and wear out, eventually breaking. Check on the belt periodically and replace it when needed to maintain top performance. Please note, this includes one (1) rubber belt per order. To replace this drive belt you will need a set of wrenches and pliers. • Disconnect the spark plug wire • Lower the mower deck to the lowest position • Move the blade engagement lever to the Off position • Roll the belt off the engine pulley from between the belt guide and pulley • Remove the bow-tie pins securing the left and right lift arms to the mower deck • Remove the bow-tie pin from the front suspension arm • Turn the front wheels to the left for easier access • Raise the mower deck lift lever to the highest position • Slide the mower deck to the left and disconnect the blade engagement cable • Carefully slide the mower deck out from under the right side of the riding lawn mower • Remove the bolts from the mower deck belt pulley covers and pull the covers off • Loosen but don't remove the nuts on the top of the idler pulleys • Install the new mower deck belt • Reassemble and test the mower

Fix Number

FIX17016487

Manufacturer Part Number

593773401

This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a key component for effective cutting performance. To ensure optimal operation and extend the life of the belt, it’s important to clean the pulleys before installation. Regular inspection is recommended, and the belt should be replaced if it becomes worn or stretched. A set of wrenches is required to complete the installation.