Husqvarna Lawn Mower Belts

Fix Number

FIX16380739

Manufacturer Part Number

592855201

This is a genuine OEM replacement part, sold individually. V-belt drive systems, also called friction drives (because power is transmitted as a result of the belt\'s adherence to the pulley) transmit power from a drive to a driven shaft. They are easy to install, require no lubrication, and dampen shock load. It is compatible with the mowers and lawn tractors listed below.

Fix Number

FIX9982769

Manufacturer Part Number

584453101

This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring replacement. You may need a wrench when replacing this part. This item is sold individually

Fix Number

FIX17016841

Manufacturer Part Number

598559101

This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serves as a direct replacement for a worn or missing original part. It plays a critical role in the mower’s operation by transferring power to rotate the blades, ensuring consistent cutting performance. Over time, belts can wear, crack, or stretch, leading to reduced efficiency or complete failure. Replacing the drive belt restores proper function and helps maintain the longevity of your equipment. For accurate installation and compatibility, please consult your model’s owner’s manual and parts diagram to verify the correct location and application of this component.

Fix Number

FIX9011522

Manufacturer Part Number

532144959

This is a drive belt for a lawn tractor or lawn mower. The belt is designed to turn the pulley that spins the blades on the mower deck. If the blade is not turning correctly, it could be due to a worn belt. This OEM rubber drive belt measures approximately 95-Inches long and 1/2-Inch wide, however keep in mind that a used belt may measure differently due to stretching. For this repair you will need a wrench set.

Fix Number

FIX11824864

Manufacturer Part Number

587686701

This drive belt 54 is a genuine manufacturer sourced replacement part. This is the main deck belt that rotates the blades on riding lawn mowers/tractors. Over time this belt will stretch and wear out, eventually breaking. Check on the belt periodically and replace it when needed to maintain top performance. Please note, this includes one (1) rubber belt per order. To replace this drive belt you will need a set of wrenches and pliers. • Disconnect the spark plug wire • Lower the mower deck to the lowest position • Move the blade engagement lever to the Off position • Roll the belt off the engine pulley from between the belt guide and pulley • Remove the bow-tie pins securing the left and right lift arms to the mower deck • Remove the bow-tie pin from the front suspension arm • Turn the front wheels to the left for easier access • Raise the mower deck lift lever to the highest position • Slide the mower deck to the left and disconnect the blade engagement cable • Carefully slide the mower deck out from under the right side of the riding lawn mower • Remove the bolts from the mower deck belt pulley covers and pull the covers off • Loosen but don't remove the nuts on the top of the idler pulleys • Install the new mower deck belt • Reassemble and test the mower

Fix Number

FIX17016487

Manufacturer Part Number

593773401

This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a key component for effective cutting performance. To ensure optimal operation and extend the life of the belt, it’s important to clean the pulleys before installation. Regular inspection is recommended, and the belt should be replaced if it becomes worn or stretched. A set of wrenches is required to complete the installation.

Fix Number

FIX16380736

Manufacturer Part Number

592855001

This is a genuine OEM supplied belt which is designed for use with Husqvarna, Jonsered and Poulan riding lawn mowers and garden tractors. It is the main belt for the deck that drives the blades. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. One durable rubber v-belt is included. A wrench set might be needed to perform this repair. Check the owner's manual for your model to ensure the correct replacement procedure.

Fix Number

FIX16370615

Manufacturer Part Number

580364609

Fix Number

FIX9016821

Manufacturer Part Number

532196853

This high quality replacement v-belt is an authentic manufacturer sourced replacement part. It is specially produced for use with Husqvarna and Poulan walk-behind lawn mowers. This is the the main belt that rotates the blades. Over time belts tend to wear out, stretch or break eventually requiring replacement. When replacing this belt, make sure to clean off the drive pulleys to prolong the life of the new belt. This part is made from durable rubber and it is sold individually.

Fix Number

FIX9288485

Manufacturer Part Number

539110411

Maintain peak performance in your riding lawn mower or garden tractor with this genuine OEM replacement drive belt, engineered for select Poulan, Jonsered, and Husqvarna models. Supplied directly by the original equipment manufacturer, this high-quality belt connects to the transmission to help drive the unit efficiently and reliably. Measuring 1/2 inch wide by 56-5/16 inches long, the belt is made from durable rubber designed to resist stretching and wear over time. As part of regular maintenance, replacing a worn or stretched belt ensures smooth operation and extends the life of your equipment. Installation is simple and requires only a standard wrench set. Begin by removing the mower deck and releasing the tension on the old belt. Carefully route the new belt around the pulleys according to your model’s specifications, then reattach the deck and check for proper tension before use. Sold individually, this replacement belt is a dependable solution for restoring drive performance and keeping your mower in top condition.