Honda Engine Carburetors

Fix Number

FIX9898058

Manufacturer Part Number

16100-Z0L-023

If the carburetor is damaged or clogged it may cause your engine to run rough or not start at all. The carburetor can sometimes be cleaned or rebuilt, but it likely needs to be replaced. This part includes the complete carburetor and is sold individually. When replacing the carburetor, it is also an opportune time to clean the fuel tank and replace the fuel filter, which are sold separately. This OEM carburetor is designed by the manufacturer, ensuring the best possible performance.

Fix Number

FIX9899046

Manufacturer Part Number

16211-ZL8-000

This is a manufacturer-approved carburetor insulator, which helps to minimize the transfer of heat from the engine to the carburetor. By providing insulation, it helps to protect damage to the carburetor and ensures the safe operation of your small engine. This part can start to deteriorate over time, in which case it should be replaced right away. This OEM part is designed to work with small engines in a variety of different model-types, such as lawnmowers, snowblowers, generators, and more. This part is sold as an individual part.

Fix Number

FIX9898059

Manufacturer Part Number

16100-Z0L-853

This is a carburetor assembly for a small engine. This is a genuine OEM carburetor, ensuring optimal engine performance. The carburetor is responsible for bringing air and fuel together in a perfect mixture for combustion. A malfunctioning carburetor could be the reason your engine will not start. When replacing this part on a lawn mower, start by removing the air filter cover, the air filter, and air filter base. Remove the fuel line and throttle linkages from the old carburetor, making sure the fuel is turned off. The new carburetor can now be installed in its place.

Fix Number

FIX12125846

Manufacturer Part Number

16100-Z8B-901

This carburetor assembly is supplied by the original equipment manufacturer. It is attached to the engine intake manifold where it combines the right proportion of fuel and air and delivers it to the engine. If you are experiencing issues such as rough idling, hard starting, low power output, and excessive fuel consumption, and you have inspected all other equipment parts for fault, you will need to replace the carburetor. To begin the repair, ensure the equipment is switched off, and the fuel tank is drained. Remove the engine housing to access the carburetor. Remove the mounting hardware that secures the carburetor and pull it off the engine. Replace the appropriate gaskets if they are worn down or loose. Place the new carburetor on the engine and install the fasteners to hold it in place. Refill the fuel tank and reassemble the engine housing to complete the repair.

Fix Number

FIX9898080

Manufacturer Part Number

16100-Z0Y-813

It is an authentic OEM sourced component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. The purpose of a carburetor is to mix air and gas before the fuel goes to the engine. If the engine won\'t start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. It provides an identical replacement for a missing or a faulty assembly that was installed on a new unit. Keep in mind this high-quality metal body carburetor is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

Fix Number

FIX9899093

Manufacturer Part Number

16220-ZE1-020

This part is a genuine OEM item that has been sourced to be used with Honda small engines. This spacer is used as a link between the carburetor and the air cleaner elbow. The carburetor spacer is priced as an individual part, please note associative parts are available separately.

Fix Number

FIX9899091

Manufacturer Part Number

16220-ZA0-702

This item is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. This item is used to provide spacing between the carburetor and the air cleaner assembly. The carburetor spacer is priced as a single item.

Fix Number

FIX9898071

Manufacturer Part Number

16100-Z0T-911

This is a manufacturer authorized replacement part which is specially designed for Honda engines commonly installed on lawn and garden equipment. The purpose of a carburetor is to mix the air and the gas before the combustible mix is sent to the engine. If the engine won't start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. This high-quality carburetor has a durable metal body and is sold individually, please note the gaskets are sold separately.

Fix Number

FIX9898087

Manufacturer Part Number

16100-Z1C-V01

This replacement carburetor assembly is an authentic item which is supplied by the original equipment manufacturer for use with Honda engines commonly installed on lawn and garden equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. This high-quality component is made of durable metal and it is sold individually.

Fix Number

FIX9898051

Manufacturer Part Number

16100-Z0H-053

This carburetor assembly is for lawn and garden equipment engines. Carburetor assembly mixes air and gas before the fuel mix goes to the engine. Let the engine cool and drain the gas tank before installing this part. Work in a well-ventilated area and wear work gloves to protect your hands.