Select Your Honda Engine Model

This is a genuine OEM Honda replacement part. Spark plugs are used to take energy from the battery to create and electric spark, that spark is used to ignite the air fuel mixture in your small engine. Spark plugs are commonly used in of a number of small engines, such as lawn mowers, generators, snow blower, trimmers, augers, etc. It is recommended that you inspect your spark plug while you are doing regular maintenance, so you can clean and change the part when necessary. If you don?t replace it often enough you may have trouble starting the engine or it may run rough. To install this part you will need a spark plug socket.

This is a genuine Honda replacement part. Air cleaners are also known as air filters and are used to stop dirt, dust debris from clogging up and contaminating the carburetor and damaging the engine. When your air filter is dirty or clogged the engine may not start, or it might run rough. You can clean the filter a couple of times, but it should be replaced once is becomes clogged and dirty. This air filter uses two stage designs with paper pleats to ensure it is picking up the most dust, dirt and debris. Installing a new air filter is simple, you need to remove the air filter cover and the old air filter, insert the new filter and put the air filter cover back in place. This product is sold individually.

This is a genuine OEM replacement part sourced directly from the manufacturer. This 8mm nut-flange is an integral part of a number of small engines, such as lawn mowers, snow blower, trimmers, etc. The 8mm nut-flanges are used in a variety of ways depending on the engine; refer to model specific diagrams for appropriate use and application. This nut-flange is made of metal. To install or remove nuts you will need a wrench.

This is a genuine Honda replacement part. Tube clips are used in small engines, such as lawn mowers, to ensure the fuel line is securely attached to each area of the engine, such as the fuel tank, and the carburetor. It is important that your tube clips are functioning properly, having a secure fuel line ensures you are not leaking fuel. This part is made of metal. You will require pliers to install and secure tube clips.

This is an authentic OEM replacement part source directly from Honda. This 6mm nut-flange is an integral part of a number of small engines, such as lawn mowers, snow blower, trimmers, augers, etc. The 6mm nut-flanges are used in a number of ways depending on the engine; refer to model specific diagrams for appropriate use and application. This nut-flange is made of metal. To install or remove nuts you will need a wrench.

This is an OEM part sourced directly from Honda. This screw-tapping is an integral part of a number of small engines, such as lawn mowers. This screw-tapping is generally used to secure the muffler parts, refer to diagrams for proper uses and application. The screw is sold individually and is made out of metal. To install this screw you will need a screwdriver.

This is an OEM part sourced directly from the manufacturer. This bolt-flange is an integral part of a number of small engines, such as lawn mowers, generators, snow blower, trimmers, augers, etc. The bolt-flanges can be used in many ways depending on the engine, refer to model specific diagrams for appropriate use. To install or remove bolts you will need a wrench.