OEM Cub Cadet Chipper Shredder Parts & Accessories

Wsh, Bell., .34 x .872 x .06

$6.55

Fix Number: FIX9118681
Manufacturer Part Number: 736-0242

This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.

Hex Washer Hd. Self-Tapping Scr. 5/16-18 x .75" Lg.

$6.51

Fix Number: FIX9088770
Manufacturer Part Number: 710-1260A

Lawn Mower Plastic Flange Bearing

$9.85

Fix Number: FIX9302372
Manufacturer Part Number: 741-0487C

This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rotate. It has an inner diameter of 0.6 inches. This part is most commonly used on a shaft to allow the shaft to spin inside the cylinder.

Clip Retaining Pin

$6.55

Fix Number: FIX9127704
Manufacturer Part Number: 781-0735

It is a genuine item that is supplied by the original equipment manufacturer for use with garden chipper-shredders. This special pin clip helps to secure the blade-flail. If the part is missing or is damaged, this will provide an identical replacement for the pin clip that was installed on a new unit. To ensure the exact location and the correct application of this hardware, refer to the appropriate diagrams for your model. Keep in mind this high-quality pin clip is made of durable metal and is sold as an individual item. You may need a screwdriver and pliers to perform this repair.

Blade-flail

$40.35

Fix Number: FIX9096396
Manufacturer Part Number: 719-0329

The flail blade attaches to the impeller assembly. This is an OEM part sourced directly from the manufacturer and used in chippers made by MTD, Troy-Bilt, Yard Machines, and Cub Cadet. It is available as an individual replacement part even though two may be needed. This part may require a socket set, a wrench set, and a hammer during installation. It is made of metal and will need to be replaced if it breaks or cracks.

Chipper / Shredder Flail Blade

$25.78

Fix Number: FIX9098575
Manufacturer Part Number: 719-04308

This is an original part from the MTD manufacturer. The flail blade is constructed of durable metal, and is compatible with chipper/shredder devices. This part is secured onto the impeller assembly, and has been designed to shred or cut lawn and garden debris. This part is sold individually. A hex key and a wrench are helpful in the removal and replacement.

Lawn Mower Chute Strap

$12.55

★★★★★

1 Review

Fix Number: FIX9300330
Manufacturer Part Number: 723-04008A

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with attachments for riding lawnmowers. The special chute strap is used to secure the lower portion of the twin bagger's chute assembly. This strap is available as an individual replacement part.

Carburetor Assembl

$159.73

Fix Number: FIX10035046
Manufacturer Part Number: 951-12785

This manufacturer approved replacement item is made for use on lawn and garden equipment engines. Carburetor is designed to produce a combustible mixture of air and gas to send it to the engine. This kit includes a metal body carburetor and a plastic lever. Please note gaskets are sold separately. To replace this item you would need a screwdriver. • Remove the rear cover • Remove the old carburetor • Install the new carburetor • Re-assemble and test the unit

Hex L-Nut

$6.51

Fix Number: FIX9406571
Manufacturer Part Number: 712-0429

This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.

Watch the install video

Recoil Starter Asm

$119.24

Fix Number: FIX9174313
Manufacturer Part Number: 951-12418

This recoil starter is a genuine manufacturer-approved replacement part. It is commonly used in yard machines. When the handle on the rope is pulled, the pulley is rotated. The machine can be started manually through this process. This part is made of plastic, and it should be replaced if it is broken or damaged. A socket wrench is needed to replace this item.

Cub Cadet Chipper Shredder Parts

Popular Cub Cadet Chipper Shredder Parts

Cub Cadet Chipper Shredder Appliance Types

Related Cub Cadet Chipper Shredder Parts

Popular Cub Cadet Chipper Shredder Models

Cub Cadet Chipper Shredder Parts

Start With Your Model Number

Popular Cub Cadet Chipper Shredder Parts

Cub Cadet Chipper Shredder Appliance Types

Related Cub Cadet Chipper Shredder Parts

Popular Cub Cadet Chipper Shredder Models