Chipper Shredder Parts

Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242

$3.66

Fix Number FIX10006541

Manufacturer Part Number 736-0242

This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.

$26.33

Lawn Mower Ground Drive Belt

Fix Number FIX9172714

Manufacturer Part Number 954-04032B

This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.

$4.20

Washer-Lock 5/16

Fix Number FIX9311087

Manufacturer Part Number 936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following appliances: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.

$30.14

Chipper Blade

Fix Number FIX9462700

Manufacturer Part Number 981-0490

$6.72

Fl. Bearing

Fix Number FIX9302372

Manufacturer Part Number 741-0487C

This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rotate. It has an inner diameter of 0.6 inches. This part is most commonly used on a shaft to allow the shaft to spin inside the cylinder.

$3.45

Carriage Bolt, 5/16-18 x .75

Fix Number FIX10001568

Manufacturer Part Number 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...