Chipper Shredder Hardware

Fix Number

FIX8859978

Manufacturer Part Number

13211546730

This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Fix Number

FIX9298671

Manufacturer Part Number

710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Fix Number

FIX9095080

Manufacturer Part Number

712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Fix Number

FIX9298768

Manufacturer Part Number

710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Fix Number

FIX9299574

Manufacturer Part Number

712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Fix Number

FIX8917824

Manufacturer Part Number

21041752730

Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.

Fix Number

FIX9088770

Manufacturer Part Number

710-1260A

Fix Number

FIX9261895

Manufacturer Part Number

13201309820

This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.

Fix Number

FIX16431884

Manufacturer Part Number

771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.