Chainsaw Starters

★★★★★

★★★★★

1 Review

Fix Number

FIX18528849

Manufacturer Part Number

576744401

This is a manufacturer-approved starter pulley kit. The starter kit is for rebuilding the chainsaw starter. This kit includes the starter pulley, assist spring, starter hub, and screws. Please be aware that this kit does NOT include the rope and rewind spring. This kit is most commonly needed when the starter hub is worn and the teeth have started to wear off, making it so the pawls are not catching on the flywheel to start the engine. This kit will also be needed if the starter pulley is damaged.

★★★★★

★★★★★

1 Review

Fix Number

FIX9030463

Manufacturer Part Number

545008013

This authentic OEM sourced part is specially made for use with Poulan and Husqvarna chainsaws. The purpose of this spring is to retract the starter assembly, unfortunately, over time it may loose tension or get damaged eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the exact location and application of this hardware. Keep in mind it is made of durable metal and is sold individually. NOTE: Here is the link to our article on <u><a href="http://www.ereplacementparts.com/article/6299/How_to_Fix_the_Starter_on_a_Ryobi_Trimmer.html">How to Fix the Starter on a Ryobi Trimmer </u></a>

Fix Number

FIX9008182

Manufacturer Part Number

530069232

This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durable nylon, but over time may wear out and snap. When that happens, you will need to replace it. Take note the plastic grip is sold separately.

Fix Number

FIX9005221

Manufacturer Part Number

530071966

This is an OEM recoil starter repair kit for a gas chainsaw. This kit consists of a plastic pulley, hub, return spring, and two screws. If the saw is having trouble starting, replacing the recoil starter kit should fix the problem. The most common reason for installing this kit is to repair a worn starter hub. The teeth are susceptible to wear, in which case it can no longer catch the pawls on the flywheel to start the engine. This kit will also solve the problem of a damaged starter pulley. This kit is also used to retrofit a regular starter into one with a spring-assist feature. The spring-assist features makes pulling the starter rope much easier, as it counteracts some of the resistance of the engine compression. For this repair you will need a screwdriver, torx drivers, long-nosed pliers, and wire cutters.

Fix Number

FIX8985240

Manufacturer Part Number

501454101

This is an authentic OEM sourced replacement part designed for use with Husqvarna chainsaws. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually. To complete this repair you would need a screwdriver.

Fix Number

FIX16326075

Manufacturer Part Number

3209810-S

This authentic manufacturer-sourced replacement part is specially produced for use with Kohler engines commonly installed on Toro lawn and garden equipment. The starter motor provides an initial motion, engage the flywheel to start the engine. Please note this high-quality component is sold individually.

Fix Number

FIX9272440

Manufacturer Part Number

237878-S

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

Fix Number

FIX9283026

Manufacturer Part Number

504597002

This part is an OEM from Husqvarna for use with Husqvarna Chainsaws. The recoil starter assembly spins the crankshaft to start the engine when you pull the rope. This part is sold individually. The most common reason for replacing the recoil starter assembly is if any of the parts it contains the starter rope, the rewind spring, and the recoil starter pulley is worn out or broken, causing the engine to not start. These parts can also be purchased and replaced individually. The toll that you will need to install the recoil starter is a screwdriver.

Fix Number

FIX8899466

Manufacturer Part Number

17722606530

This is an authentic OEM supplied replacement starter rope that is produced for use with Echo gas powered equipment. It is the part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

Fix Number

FIX9283248

Manufacturer Part Number

505305125

This is a genuine manufacturer approved replacement part designed for use with Husqvarna chainsaws. The purpose of this rope is to allow user to to start the engine. Includes one (1) fabric rope per order. Please note the grip/handle is sold separately.