Official Craftsman Chainsaw Filters

Engine Fuel Filter

$9.79

Fix Number: FIX9285148
Manufacturer Part Number: 530095646

This is a single fuel filter found in numerous types of lawn and garden equipment that have small engines. The fuel filter cleans the fuel before making its way to the carburetor, thus preventing build up. If this flow of fuel is blocked, this will cause issues with starting the engine. Luckily, this common maintenance task is very quick and easy to do, and should be done annually, if not more depending on usage. You will start by draining the fuel tank and removing the spark plug.

Fixes these symptoms

Engine stops after a few seconds or minutes
Will Not Start
See more...

Chainsaw Fuel Filter

$13.15

Fix Number: FIX12661913
Manufacturer Part Number: 591375401

Located inside the fuel tank, the fuel filter removes debris before it can reach the carburetor. If your small engine starts with difficulty or idles rough, it may be clogged, restricting the flow of fuel to the carburetor. Replacing the fuel filter is a maintenance task that should be performed regularly to ensure your engine continues to run efficiently. This manufacturer-approved part is sold individually.

Foam Air Filter

$6.95

Fix Number: FIX16352489
Manufacturer Part Number: 530037793

This foam air filter helps protect your engine by trapping dust and debris before they reach key internal components, supporting proper airflow and performance. Made from durable, high-density foam, it is designed for reliable filtration during regular operation. Replacing a clogged or worn filter can improve engine efficiency, extend equipment life, and restore consistent performance.

Engine Oil Filter

$16.45

Fix Number: FIX9065087
Manufacturer Part Number: 696854

This is a manufacturer-approved oil filter replacement, sold independently. The oil filter is essential in preventing damaging impurities from mixing with the engine oil. Having a well-maintained oil filter is extremely important to keeping your engine running smoothly and efficiently. It is recommended to replace the oil filter at least once a season, every one-hundred hours, or every other oil change. If you work in a particularly dusty or sandy environment, change more frequently. To change the oil filter, start by draining the oil from the engine (in accordance with your manufacturer instructions). Next, remove the old filter and wipe up the filter adapter gasket surface. Apply a light coat of clean oil to the rubber gasket on the new oil filter. Install the replacement oil filter onto the filter adapter. Turn it clockwise until secure.

Watch the install video

Air Filter

$7.65

Fix Number: FIX16352707
Manufacturer Part Number: 530057925

This part includes one OEM air filter for a chainsaw. We suggest having a few extra of these on-hand as they are a regular maintenance part that should be inspected and replaced regularly (at least once a year). The air filter plays the important role of blocking debris from making its way to the carburetor and engine, which can lead to serious engine problems. When the air filter is at capacity, this limits the air flow to the engine, causing it to not perform properly or at all.

Air Filter

$7.65

Fix Number: FIX12607075
Manufacturer Part Number: 545057701

This is an individual air filter for a chainsaw. It is sourced directly from the original manufacturer, ensuring proper fit and quality performance. The air filter protects the carburetor and engine from debris such as sawdust. If the air filter is clogged, this can cause a poorly performing engine and increased fuel consumption. As part of your regular maintenance, the air filter should be cleaned every five hours and replaced when tarnished or damaged. When cleaning or replacing the air filter, be sure to also clean the cover and surrounding area so debris does not get into the carburetor chamber while the cover is removed.

Air Filter

$9.79

Fix Number: FIX16352701
Manufacturer Part Number: 530057869

This is a genuinely sourced air filter for a chainsaw, sold as one unit. A dirty or worn air filter can decrease the life and performance of the engine and increase the amount of fuel consumed, which is bad for the environment and your pocket. The air filter should be cleaned every 5 hours of operation. Keep in mind that once the air filter has been used, it is not possible to clean it completely, therefore should be replaced every fifty hours of operation, or once a year. To access the air filter, unfasten the screws securing the cylinder cover and remove it. Remove the air filter cover and air filter. Line-up the new air filter and reassemble your equipment.

Watch the install video

PLEATED FILTER

$12.05

Fix Number: FIX18528549
Manufacturer Part Number: 575296301

Husqvarna Genuine OEM Filter which is sold individually. The function of this part is to clean the air entering the carburetor on chainsaws. If the chainsaw engine stops after a few seconds or runs poorly it is recommended to replace the filter. Pleated Filters have proven to be efficient, effective, and cost-effective way to clean the air supplied into carburetor.

Filter-a/c Cartridge

$18.65

Fix Number: FIX8982418
Manufacturer Part Number: 499486S

This is an authentic manufacturer approved replacement part designed for use with lawn and garden equipment engines. Its purpose is to filter out dust and debris from contaminating the carburetor. This filter is made out of paper and plastic. It is sold individually. To replace this filter no tools are needed. • Remove the air cleaner cover • Replace the air filter • Secure the cover back

Filter-a/c Cartridge

$19.75

Fix Number: FIX11830038
Manufacturer Part Number: 794421

This replacement air cleaner cartridge is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Its purpose is to filter out dust and debris from contaminating the engine. The air n¼ülter should be checked periodically or if the engine drops in power. This part consists of a plastic frame and a pleated paper filter. One cartridge is included per order. Please note, the pre-cleaner filter is sold separately. Replacing this part is a simple task that should not require any tools. • Remove the cover • Take out the old filter cartridge • Secure the new one in place • Reattach the cover

Craftsman Chainsaw Filters

Popular Craftsman Chainsaw Filters

Related Craftsman Chainsaw Parts

Craftsman Chainsaw Filters

Start With Your Model Number

Popular Craftsman Chainsaw Filters

Related Craftsman Chainsaw Parts