Brush Cutter Hoses and Tubes

Popular Brush Cutter Hoses and Tubes

Fix Number
FIX8862036
Manufacturer Part Number
13201056330
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has primed the carburetor to start. Depending on usage, this part will weaken and crack, that is when you will need to replace it.
Fuel Line
$15.54
In Stock
Fix Number
FIX9008192
Manufacturer Part Number
530069599
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part can become weak and crack over time due to its constant contact with fuel, in which case will need to be replaced. It is sold separately and is an OEM quality replacement part.
Fixes these symptoms
Fuel Line Fitting
$7.76
In Stock
Fix Number
FIX9003834
Manufacturer Part Number
530023877
This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality hardware is made of durable plastic and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item.
Fixes these symptoms
Trimmer Hose
$6.51
In Stock
Fix Number
FIX9020992
Manufacturer Part Number
537042401
This is a hose for your lawn and garden equipment. It is just over 4 inches long, and made of a strong, and durable plastic. The hose is connected to the air purge bulb and the carburetor, and may be called a fuel hose. If you use your machine often, this part will deteriorate and crack, allowing fuel to leak out. If your line is damaged it should be replaced right away. This hose could also be used as the return fuel line.
Fuel Hose
$20.22
In Stock
Fix Number
FIX17016374
Manufacturer Part Number
581756205
This is a genuine manufacturer sourced replacement part designed for use with Husqvarna chainsaws, brushcutters and hedge trimmers. This is the hose that delivers fuel from the tank to the engine. It is made out of rubber and it is sold individually. Please note fuel filter is sold separately.
Fuel Hose Assembly
$23.33
In Stock
Fix Number
FIX17016854
Manufacturer Part Number
597967303
This is a genuine manufacturer-supplied component which is designed for Husqvarna handheld lawn and garden equipment. The pipe-comp is utilized to supply fuel from the tank to the carburetor. Unfortunately, over time the material can deteriorate and the pipe can begin to crack eventually requiring a replacement. Check the diagrams for your model to ensure the correct repair procedure.
Fuel Line
$6.51
In Stock
Fix Number
FIX16535462
Manufacturer Part Number
V471001211
OEM replacement part, this item is sold individually. This tube is connected to the fuel line grommet. Depending on the model you have it is either on the outside of the fuel tank or the inside of the fuel tank It is attached to the fuel filter inside the tank. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is used on the model numbers shown below.
Main Pipe Assembly
$47.73
In Stock
Fix Number
FIX16757749
Manufacturer Part Number
C050003300
Fuel Hose/38mm
$10.88
In Stock
Fix Number
FIX9020748
Manufacturer Part Number
537042402
This 38 mm fuel hose is a genuine OEM sourced item, it is not an aftermarket imitation. It is high quality item specially designed for Husqvarna chainsaws, brushcutters and string trimmers. This hose is connected to the carburetor. Over time fuel lines tend to deteriorate and crack allowing for leaks. A damaged or brittle line should be replaced immediately. Please note, one flexible plastic fuel hose is included per order.
Fuel Pipe Sub Assembly
$16.32
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9236026
Manufacturer Part Number
P021017770
This is a genuine OEM part. The fuel pipe sub assembly is compatible with Shindaiwa Brushcutter models. Composed of metal, wiring and plastic, this item is secured to the fuel filter assembly delivers gasoline from the tank to the carburetor. This item is sold individually, and a hex key is needed for the repair.

Brush Cutter Hose or Tube Brands