Jenny Parts

Fix Number

FIX10375230

Manufacturer Part Number

610-1032

This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If your pump is leaking on/around the discharge valve, or if the pump has higher pressure or a low flow rate, this discharge valve would be worth inspecting to see if it needs replacing. Replacing this assembly is easy and requires you to first power off the pump and disconnect the pump head and gasket. You can then remove the old assembly and install the new one. It is recommended that you replace the gasket at this juncture as well, but it is not mandatory. With the new assembly installed, reinstall the pump head and test your pump.

Fix Number

FIX10375229

Manufacturer Part Number

610-1031

This suction valve, also known as a discharge valve, is sourced from the original equipment manufacturer for use in air compressors. It is responsible for ensuring that air is drawn into the cylinder when the piston moves downward. When the piston moves back up during the compression stroke, the suction valve closes to prevent the compressed air from flowing back into the suction line. It includes the valve spring, valve retainer, valve seat, and valve guard. Over time, the valve may wear out, become clogged with debris, or become damaged, leading to overheating, reduced power output, and low pressure. Begin the repair by disconnecting the compressor from the power source. Locate the suction valve in the pump head and remove the valve guard. Remove the valve seat and detach the suction valve and spring. Place the new valve components in the pump head and ensure they are securely fitted.

Fix Number

FIX10374911

Manufacturer Part Number

150-1010

This is a genuine OEM supplied replacement element-filter, it is specially designed for use with Jenny pumps that are used to build pressure on air compressors. It is a high-quality component which helps to ensure the air that is supplied to the unit is free of dust or any other harmful contaminants. Over time filters will get dirty restricting the airflow and eventually requiring replacement to maintain peak performance. It is a durable pleated paper filter which is sold individually.

Fix Number

FIX10374594

Manufacturer Part Number

104-1249

This is a genuine Jenny replacement part for use in compressors. The rubber pad attaches the portable dual tank. A hammer may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

Fix Number

FIX10374574

Manufacturer Part Number

104-1007

This is the gasket that helps to create an air tight seal between the valve plate and the cylinder, for correct application make sure to check appropriate diagram if your unit. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is a high quality replacement part that is supplied by original manufacturer for use with Jenny pumps. Please note this part is made with durable composite material and it is sold individually.

Fix Number

FIX10374906

Manufacturer Part Number

142-1003

This genuine manufacturer sourced gauge is designed for use with Jenny air compressors. The gauge registers pressure readings and allows you to maintain needed pressure. It provides an identical replacement for a damaged or a missing component that was installed on a new unit. Note, this high-quality gauge is sold as an individual item. You would need a wrench to secure this gauge to the manifold. When replacing this item make sure to unplug the air compressor and bleed out air from the tank.

Fix Number

FIX10374575

Manufacturer Part Number

104-1008

This is a genuine Jenny replacement part that is sourced from original equipment manufacturer for use with portable electric pumps. Its purpose is to make an air tight seal between the cylinder head and the valve plate. Over time gaskets tend to deteriorate and get compressed eventually requiring replacement. Please note one durable composite material gasket is included per order.

Fix Number

FIX10375231

Manufacturer Part Number

610-1042

Fix Number

FIX10374885

Manufacturer Part Number

141-1047

This is an authentic OEM replacement part that has been sourced directly from Jenny. The pilot valve helps the compressor determine when to kick-in and when to shutoff. This particular valve cuts in and begins compressing air at 95 psi, and cuts out at 125 psi, although it can be adjusted for higher and lower pressures. This valve also has a hand unloader. Debris in the valve, as well as damage from moisture, or loss of tension in the spring all might lead to issues with the valve. Before replacing this part ensure the compressor is disconnected from power source, and the tank is drained of air.

Fix Number

FIX10374912

Manufacturer Part Number

150-1011

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Jenny equipment. This is an identical replacement for a missing or damaged bearing-rod that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.