OEM Jenny Compressor Parts & Accessories

Valve-unloader

$17.75

Fix Number: FIX10375231
Manufacturer Part Number: 610-1042

Element-filter

$37.33

Fix Number: FIX10374911
Manufacturer Part Number: 150-1010

This is a genuine OEM supplied replacement element-filter, it is specially designed for use with Jenny pumps that are used to build pressure on air compressors. It is a high-quality component which helps to ensure the air that is supplied to the unit is free of dust or any other harmful contaminants. Over time filters will get dirty restricting the airflow and eventually requiring replacement to maintain peak performance. It is a durable pleated paper filter which is sold individually.

Gasket-cylinder

$6.51

Fix Number: FIX10374573
Manufacturer Part Number: 104-1006

This is an OEM replacement part for use in Jenny stroke pumps and compressors. The cylinder gasket fits between the right bank and the left bank and helps to provide a seal. It might require a wrench to replace this part if it becomes broken. This is available as an individual replacement part and is made of a thin material.

Gasket-head

$12.85

Fix Number: FIX10374575
Manufacturer Part Number: 104-1008

This is a genuine Jenny replacement part that is sourced from original equipment manufacturer for use with portable electric pumps. Its purpose is to make an air tight seal between the cylinder head and the valve plate. Over time gaskets tend to deteriorate and get compressed eventually requiring replacement. Please note one durable composite material gasket is included per order.

Gasket-plate

$15.00

Fix Number: FIX10374574
Manufacturer Part Number: 104-1007

This is the gasket that helps to create an air tight seal between the valve plate and the cylinder, for correct application make sure to check appropriate diagram if your unit. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is a high quality replacement part that is supplied by original manufacturer for use with Jenny pumps. Please note this part is made with durable composite material and it is sold individually.

Gauge-psi

$36.60

Fix Number: FIX10374906
Manufacturer Part Number: 142-1003

This genuine manufacturer sourced gauge is designed for use with Jenny air compressors. The gauge registers pressure readings and allows you to maintain needed pressure. It provides an identical replacement for a damaged or a missing component that was installed on a new unit. Note, this high-quality gauge is sold as an individual item. You would need a wrench to secure this gauge to the manifold. When replacing this item make sure to unplug the air compressor and bleed out air from the tank.

Pad-rubber

$18.87

Fix Number: FIX10374594
Manufacturer Part Number: 104-1249

This is a genuine Jenny replacement part for use in compressors. The rubber pad attaches the portable dual tank. A hammer may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

Aftercooler-hose

$70.86

Fix Number: FIX10375139
Manufacturer Part Number: 360-1392

This is an authentic OEM replacement part that has been sourced directly from Jenny. This aftercooler hose, part of the intercooling process, is commonly used in multistage compressors to help remove waste heat in-between compression stages. This hose goes between two cylinders and cools the compressed air as it travels from cylinder to cylinder. As air is compressed the temperature increases, as does the volume, the intercooler cools the air before it reaches the next cylinder. When the air is cooled, and the volume of the air decreases, the efficiency of the cylinder increases as it requires less work to compress the air. The Aftercooler hose is sold individually.

Discharge Valve

$16.34

Fix Number: FIX10375230
Manufacturer Part Number: 610-1032

This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If your pump is leaking on/around the discharge valve, or if the pump has higher pressure or a low flow rate, this discharge valve would be worth inspecting to see if it needs replacing. Replacing this assembly is easy and requires you to first power off the pump and disconnect the pump head and gasket. You can then remove the old assembly and install the new one. It is recommended that you replace the gasket at this juncture as well, but it is not mandatory. With the new assembly installed, reinstall the pump head and test your pump.

Switch-psi

$121.86

Fix Number: FIX10374851
Manufacturer Part Number: 140-1074-01

This is a genuine Jenny replacement part. The PSI switch is designed by the manufacturer for use in compressors. This part is made of metal and high-quality plastic, and is connected to the manifold block in the side of the tank to help control the internal pressure of the tank. This product is supplied as an individual replacement part.

Jenny Compressor Parts

Popular Jenny Compressor Parts

Jenny Compressor Appliance Types

Popular Jenny Compressor Models

Jenny Compressor Parts

Start With Your Model Number

Popular Jenny Compressor Parts

Jenny Compressor Appliance Types

Popular Jenny Compressor Models