See part 8 in the diagram
( Grid squares measure 1x1 inch )
Thermistor
$71.02
In Stock
Fix Number: FIX11755741
Manufacturer #: WPW10503764
Manufactured by:
Whirlpool
-
Product Description
This part monitors the temperature and sends the readings to the electronic control board.
-
Works with the following brandsKitchenAid, Whirlpool, Kenmore, Jenn-Air
-
Works with the following productsIce Maker
-
Part Number Cross ReferencePart# WPW10503764 replaces these:2185679, 2217288, 2313633, W10503764, WP2217288, WP2313633
Product Description
This part monitors the temperature and sends the readings to the electronic control board.
-
Works with the following brands:KitchenAid, Whirlpool, Kenmore, Jenn-Air
-
Works with the following products:Ice Maker
-
Part# WPW10503764 replaces these:2185679, 2217288, 2313633, W10503764, WP2217288, WP2313633
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:william from Mountain Brook, AL
-
Parts Used:WPW10503764
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Ice machine did not stop making ice
Best guess as to cause of the problem was that the bin thermostat had failed. Since the part was was relatively inexpensive, decided to replace it to see if that solved the problem. First, turned machine off and removed ice to a level below the thermostat probe. Then removed grid cover by removing two screws, loosened the screw holding thermostat probe in place, and unplugged the thermostat wiring connector, allowing old thermostat to be removed. Reverse the process to install new thermostat. Turned machine back on. After several ice-making cycles, the level was back up to the probe , and ice production ceased as designed. Absolutely the simplest repair I can think of!! Anyone can do tho job.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Beth from Sumter, SC
-
Parts Used:WPW10503764
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench (Adjustable)
ice maker not cycling off - making too much ice
I literally removed three nuts (two from the top tray and one from the wall)and unplugged the old bin thermostat, plugged the new one in and it is working like a charm
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Richard from Gonzales, LA
-
Parts Used:WPW10503764
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Ice maker wouldn't stop making ice when bin was full. Ice would fall out when door was opened
Turned the appliance off,removed front cover with nut driver to access the connection. Disconnected thermostat, unscrewed the strap to remove the thermostat, Reversed the process and turned ice maker back on. Seemed to have solved the problem. Very easy
Was this instruction helpful to you?
Thank you for voting!
-
Customer:JAN from GREENVILLE, MS
-
Parts Used:WPW10503764
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
ice bins overfills
when checking for possible problems on parts listing, found probable cause listed for part. ordered part & replaced. had to turn unit off, remove front cutting grid cover, remove thermistor retaining screw with nut driver, unplug thermistor & remove. reverse steps with new thermistor. ice bin fills to correct level & does not make ice till level is lowered. all is well.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:James from Cape Girardeau, MO
-
Parts Used:WPW10503764
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
ce machine wasn't shutting off when bin was full.
I replaced the bin thermostat and everything is working great. It was easy. Using pliers, I loosened front cover, unplugged bin thermostat and plugged in the new one. Voila! Back in business. Saved me a service call and money!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Kelly from Alexander, AR
-
Parts Used:WPW10503764
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Increase amount of ice in bin
Screwed off front panel and as easy as 123...replaced the bin thermesistor and now the perfect amount of ice is made and bin not overflowing!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Bony from Georgetown, SC
-
Parts Used:WPW10503764
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
icemaker overflowing
figured level sensor might be the problem. Replaced it and now working properly.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11755741
Manufacturer Part Number: WPW10503764
Manufacturer Part Number: WPW10503764
Brand
Model Number
Description