Glenwood Parts

★★★★★

★★★★★

2 Reviews

Fix Number

FIX884734

Manufacturer Part Number

8009

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX11750107

Manufacturer Part Number

WPW10196405

This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX2366565

Manufacturer Part Number

W10196406RW

The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX340571

Manufacturer Part Number

330031

This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.

Fix Number

FIX11744436

Manufacturer Part Number

WP74011243

This is an OEM part sourced directly from Amana. This surface infinite element switch is commonly used in ranges and cooktops. This switch is designed to turn the surface element on and off, as well as control the temperature setting. The control knob fits onto the mental shaft and allows you to operate the switch. To successfully replace this switch you will need a nut driver and a screwdriver. This switch is sold individually. Before you begin replacing this part unplug your appliance.

Fix Number

FIX11757467

Manufacturer Part Number

WPY04000036

This electric range economy Y-frame surface element measures six inches and has three turns. It carries 1250 watts and is used on some electric ranges. The center medallion is chrome.

Fix Number

FIX11757466

Manufacturer Part Number

WPY04000035

This electric range economy Y-frame surface element measures eight inches and has five turns. It carries 2100 watts and is used on some electric ranges. The center medallion is chrome.

Fix Number

FIX11757498

Manufacturer Part Number

WPY07506601

This black oven thermostat knob is just over two inches in diameter. It has a chrome trim around the perimeter of the knob and white lettering denoting the various temperature within the oven.

Fix Number

FIX11757497

Manufacturer Part Number

WPY07491300

This is an OEM part sourced directly from the manufacturer. This bake or broil spark igniter, also known as a spark electrode, is used in ranges and wall ovens. This electrode is used to help ignite the brake or broil element inside your appliance. This electrode uses electrical current to create that spark that ignites the gas. If you notice your electrode is glowing but no spark is occurring that is an indication your electrode is weak and needs to be replaced. To successfully replace this part you will require a screwdriver. Before you begin repairs shut off the gas and unplug your appliance.

Fix Number

FIX11742283

Manufacturer Part Number

WP4157180

This is a genuine OEM replacement part. This surface burner ignition switch is commonly used on ranges, wall ovens, cooktops, and microwave oven combos. When the gas burner valve is pressed this is the part that creates the spark needed to light the gas that heats the burner. If your ignitor is not creating a spark when the knob is activated, you might have an issue with your burner ignition switch. You will need a screwdriver to successfully replace this part. Before you begin repairs make sure your appliance has been unplugged, and ensure the gas supply has been shutoff.