Gaggenau Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Gaggenau Appliance Parts
Shop By Appliance Type

Popular Gaggenau Parts

Tine Holder – Part Number: 00418498
Tine Holder
$6.52
In Stock
Fix Number
FIX8712513
Manufacturer Part Number
00418498
This tine hold is a genuine OEM replacement part for your dishwasher, measuring approximately 1 inch long and is sold individually. This part is also known as a tine clip or a rack flip tine clip. It is used to the hold the tines of your dishrack in place. Once you have adjusted the tine racks to a position that works with your dishes, this clip will hold the tines in place and is designed to hold two rows. There are no tools required to install a new clip, but a flathead screwdriver may be needed to remove the old one. The new clip just snaps onto the dishrack, and you can then adjust and hold the tines in place.
Adjustable Tine Row Clip – Part Number: 00611981
Adjustable Tine Row Clip
$6.51
In Stock
Fix Number
FIX8727471
Manufacturer Part Number
00611981
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in position, you could have one or more broken tine clips. To replace a tine row clip, simply snap the old tine row clip out, and replace it with the new clip. This part is made of gray plastic and is approximately one inch long and half an inch wide. This part is sold individually, so it is a good idea to check all of your tine row clips to determine if more than one are broken.
Watch the install video
Crisper Drawer – Part Number: WP67002659
Crisper Drawer
$110.79
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11743502
Manufacturer Part Number
WP67002659
The crisper drawer is used to help prolong the life of your produce, by sealing itself off from the rest of the fridge to create a high humidity environment. If your drawer has become cracked or damaged, the drawer may not work as intended and should be replaced. No tools are required for this repair, simply remove the old drawer and slide a new crisper drawer into place. This is a genuine OEM product that is made of a clear plastic and sold individually.
Fixes these symptoms

Installation Instructions

Tom from ZIMMERMAN, MN
Broken drawer
Took front trim of old drawer , snapped it on to the new drawer, slid new drawer in place. Read more...
Door Spring Kit – Part Number: 00754866
Door Spring Kit
$50.89
In Stock
Fix Number
FIX8770519
Manufacturer Part Number
00754866
This kit includes 2 spring and 2 cables. This door spring kit is for dishwashers. Door spring kit applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. The kit may include multiple parts; refer to your parts diagram for a list of parts included.
Fixes these symptoms
Watch the install video
Refrigerator Door Switch – Part Number: W11384469
Refrigerator Door Switch
$31.05
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX12728638
Manufacturer Part Number
W11384469
Door switch turns the light off when you close the door.
Fixes these symptoms

Installation Instructions

Marilyn from Dublin, OH
Light switch no longer worked
Turn off and unplug your refrigerator. I used the screwdriver on the left side of the part (where the plug is) and used the putty knife at the same time on the right side to push the spring lock portion of the part in. The part snapped out. I unplugged the left contact from the plug and put it on the new part, then I unplugged the right contact and put it on the new part. I did this so the wires would not go up into the refrigerator and be hard to find. I put the left side of the new part where the plug and contacts are in first then I snapped the right side in place. I plugged the refrigerator back in and it worked perfectly. Just take your time and gently remove and reconnect the new part. The store where I bought my refrigerator wanted $69.95 for a service call plus an hourly charge and part charge. Count on this site for your parts and do it yourself. I ordered the part on Monday, it was delivered on Tuesday around noon and I made the repair that afternoon. Read more...
Upper Rack Roller – Part Number: 10032849
Upper Rack Roller
$13.02
In Stock
Fix Number
FIX18010470
Manufacturer Part Number
10032849
This is a genuine OEM replacement rack roller wheel for the top rack of your dishwasher. If one of your wheels has become damaged, it can make your rack unbalanced and difficult to pull in and out. This can result in dishes not being properly cleaned, or potentially getting damaged. The wheel kit is sold individually and comes with one axle and one roller. Replacing a damaged wheel is an easy repair that does not require any tools, the new part simply clips into place on the rack.
Watch the install video
Refrigerator Pantry Drawer Door Cover – Part Number: W10827015
Refrigerator Pantry Drawer Door Cover
$132.34
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11723190
Manufacturer Part Number
W10827015
This genuine OEM part is a door cover for your refrigerator pantry drawer. It helps to maintain the proper temperature and humidity in the drawer by providing a seal when closed. Other names for this part include pantry drawer door or pantry drawer cover. No tools are required to replace this part. Simply release the locking tab and pull out the old cover one end at a time. Insert the new door cover, making sure the holes are properly secured around the hinge pins. The door cover should now open and close easily. To prevent damage to the new door cover, make sure that the snack drawer is fully pushed back into place before closing the cover, so that it can lay flat on the drawer.
Fixes these symptoms
  • Door won’t open or close
  • Fridge too cold
  • See more...

Installation Instructions

Warren R . from Ottumwa, IA
endcap drawer lid pin broken and pantry drawer lid clear window (plastic) cracked
Removed old pantry drawer /and plastic lid and glass shelf above as well as the two slide in drawers above(for work room) Used nut driver to remove (2) screws on right side holding drawer slide and (2) screws holdin endcap. carefully removed the piece and worked it loose. It is connected to another piece at the end, just angle it out. Switched the plastic slide piece from old to new and reinstalled side piece with nut driver. Plastic pantry drawer lid put on at this time. Open and close and check for fit My pantry drawer lid seems to catch a little right in the middle when opening. Read more...
Watch the install video
Refrigerator Pantry End Cap – Part Number: WP12656105
Refrigerator Pantry End Cap
$55.18
In Stock
Fix Number
FIX11738573
Manufacturer Part Number
WP12656105
This pantry end cap is a genuine OEM replacement part for your refrigerator. Also known as a drawer support, it is used to hold the rails and shelving for your pantry and crisper drawers. This specific piece is for the left-hand side, as if you are facing the fridge. For this repair you will need a quarter-inch nut driver in order to remove the slide rails and the hex screws that hold the end cap to the refrigerator wall. There are two rear slots and one front tab that the new shelf needs to engage with for installation, then the hex screws can be put back in place with the nut driver.
Fixes these symptoms

Installation Instructions

JOHN from E. Falmouth, MA
Pantry end part hinge that holds door to lower compartment broke off.
1. Removed glass shelf 2.remove drawers 3. Remove three screws on Pantry end Cap. Old Part is out. Recerse process to to install new part Read more...
Dishrack Roller - Grey – Part Number: 00611475
Dishrack Roller - Grey
$14.33
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX8727387
Manufacturer Part Number
00611475
This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.
Fixes these symptoms

Installation Instructions

John from BREWSTER, MA
A wheel broke.
Step 1. Snap new wheel on.
Step 2. Reward self with a beer. Read more...
Mounting Bracket – Part Number: 00619985
Mounting Bracket
$9.12
In Stock
Fix Number
FIX8728568
Manufacturer Part Number
00619985
This is an authentic metal mounting bracket for a dishwasher, sold individually. The purpose of this part is to secure the top of the dishwasher to the bottom of your counter. If there is no way to mount the dishwasher to the countertop itself, this bracket can also be used to mount a dishwasher onto the side of the cabinet. Over time this part will wear or damage, and this will cause the dishwasher to lose stability in the counter. Please note that the dishwasher will need to be moved out of the cabinet to install this part.
Fixes these symptoms

Gaggenau Appliance Types

Popular Gaggenau Models

View More
+