382742-1-M-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook
Part Location Diagram of 675611 Whirlpool Dishwasher Door Spring Assembly w/Adjusting Hook
See part 60 in the diagram
382742-1-S-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook 360 view
( Grid squares measure 1x1 inch )
382742-1-S-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook 382742-2-S-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook 382742-3-S-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook 382742-1-S-Whirlpool-675611 -Dishwasher Door Spring Assembly w/Adjusting Hook 360 view
Part Location Diagram of 675611 Whirlpool Dishwasher Door Spring Assembly w/Adjusting Hook

Dishwasher Door Spring Assembly w/Adjusting Hook 675611

Rated by 3 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$52.30
Special Order
Fix Number:
FIX382742
Manufacturer #:
675611
Manufactured by:
Whirlpool

Jump to:

Product Description

This kit includes spring, retainer and protective tip. It is recommended to replace both springs at the same time.

  • Works with the following brands:
    Whirlpool, Kenmore, Roper
  • Works with the following products:
    Dishwasher, Refrigerator
  • Fixes the following symptoms:
    Door latch failure, Door won’t close
  • Part# 675611 replaces these:
    AP3115106, 2866, 20103010, 3367658, 674759, 675611 , 71640000, 716425, 80019, 8220, 99989652, K35-636 Show less
Works with the following brands:
Whirlpool, Kenmore, Roper
Works with the following products
Dishwasher, Refrigerator
Fixes the following symptoms
Door latch failure, Door won’t close
Part Number Cross Reference
Part# 675611 replaces these:
AP3115106, 2866, 20103010, 3367658, 674759, 675611, 71640000, 716425, 80019, 8220, 99989652, K35-636

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Dishwasher Cleaner Tablets - 6
$22.00
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$19.89
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$17.80
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$27.76
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$30.85
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$26.73
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gregory from Mechanicsburg, PA
Parts Used:
675611
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Replacement of door hinge springs
First I needed to figure out what panel to take off to get to the springs. It's the kick plate that is held on to the bottom front of the dishwasher by two screws. Then note what holes the spring ends are connected to assuming at least of the two are still connected. Then remove the old spring. With new spring, ensure that the two pieces are together as shown in the instructions that come with the kit and that the little rubber foot is hooked on the end of the bottom portion of the spring (this is to keep the spring in the hole when it is finally assembled. Hook the one end on the bracket and using a hemostat or long needle nose pliers hold the bottom of the spring and angle it into the correct hole in the bottom of the washer as noted in the instructions. It is tricky since the spring wants to come apart and it will take several tries until you succeed in getting it inserted in the correct hole. Then replace the other one. Strong suggestion. Replace both springs at the same time. Save yourself some energy later.
Read less
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from Newark, OH
Parts Used:
675611
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
door spring on left side broke on this 26 year old dishwasher
removed bottom "kick plate" cover piece (2 vertical screws removed completely, 2 horizontal screws loosened) by sliding upward and then pulling out. I did not pull the dishwasher out from under the counter because I did not want to disconnect the hard plumbed rigid copper water pipe (best not to disturb those 26 year old connections) so it was a little tricker to get the spring in position and needed to use two sets of needle nose pliers to place hoop over door lever and then position the bottom offset metal piece into the groove. Used the easiest to reach groove that still provided some tension to the spring assembly and just barely got it hooked in. Then used needle nose pliers to pull in that offset metal piece with the red cap on it, towards the center line of the washer. And then, when I could easily grab that offset metal piece in the middle, and not by just the red capped portion, I pulled it down to the next slot lower for the correct tension. Because I did not pull out the washer from the cabinet enclosure, most of my time was spent wriggling that spring into position and getting the top end hooked up. Shipping time was amazing, I asked for regular shipping and I think it came the day after I ordered it. Price of the part is crazy expensive for what you get but it is the exact piece the exact length and with the other essential component, the off-set piece of metal wire/rod that is required to do the job. I could probably have bought a spring and fabricated the off set piece with a wire rod and torch for myself by removing the good spring on the other side of the door to get the dimensions and spent less than $10 on materials but that would have taken me most of a day to do assuming only one round trip to the hardware store for the right tension, length and diameter of the spring. Unless you're retired and don't know what to do with yourself, bite the bullet, order the part for $35 and get the job done quickly with the right part on the first attempt.
Read less
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from Rochester, MN
Parts Used:
675611
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
old door spring broke with a lound bang and flew across the room.
Laid the dish washer (portable) on its back on the floor and was able to hook the new spring up with no tools. Just look at the other spring to hook up the new one. The only tool I used was the vacuum cleaner to clean up the dust and cob webs from years of use.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX382742
Manufacturer Part Number: 675611
Brand Model Number Description
Kenmore 19585 Dishwasher - Kenmore Dishwasher Model 19585 (1988) (19585(1988)) Parts
Kenmore 19985 Dishwasher - Kenmore Dishwasher Model 19985 (1988) (19985(1988)) Parts
Kenmore 6651560590 Dishwasher
Kenmore 6651560591 Dishwasher
Kenmore 6651560592 Dishwasher
Kenmore 6651569580 Dishwasher
Kenmore 6651570590 Dishwasher
Kenmore 6651570591 Dishwasher
Kenmore 6651570592 Dishwasher
Kenmore 6651570990 Dishwasher
Kenmore 6651570991 Dishwasher
Kenmore 6651570992 Dishwasher
Kenmore 6651576580 Dishwasher
Kenmore 6651576581 Dishwasher
Kenmore 6651577580 Dishwasher
Kenmore 6651578580 Dishwasher
Kenmore 6651578581 Dishwasher
Kenmore 6651578582 Dishwasher
Kenmore 6651578583 Dishwasher
Kenmore 6651580590 Dishwasher
Kenmore 6651580591 Dishwasher
Kenmore 6651580592 Dishwasher
Kenmore 6651586580 Dishwasher
Kenmore 6651586581 Dishwasher
Kenmore 6651587580 Dishwasher
Kenmore 6651587980 Dishwasher
Kenmore 6651587981 Dishwasher
Kenmore 6651587982 Dishwasher
Kenmore 6651587983 Dishwasher
Kenmore 6651588580 Dishwasher
Dishwasher Door Spring Assembly w/Adjusting Hook
$ 52.30
  Special Order
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.