Top Bearing Felt

Repair was easy for this housewife! I had no problems, took off top panel, then removed face panel. Slides and felts were easy to find and replace. Seriously took less than 25 minutes total. Videos helped also! Dryer fixed, even better!!!

I watched a couple of videos on the internet. Finally found one that showed me how to take the front off. Three screws hold on the control panel back. Then two screws hold the top down. Un plug the door switch and door light. remove the electrical panel screws and get it out of the way. Then 4 screws (the 2 at bottom just loosen) hold the ... Read more front on. When the from is off, all parts are easily removed and installed. The old ones were really worn. The noise problem was solved.

I did some research online then ordered front and rear bearings. I didn't realize they came 1 in a pack, so I had to order again. Shipping was fast. When I took the dryer apart, I found the bearing was bad too. I ordered the bearing. when that arrived, it only took a few minutes to put it all back together. Assembled everything, screwed i ... Read more t together and it runs quiet like new. It was pretty straight forward. Took the panel off the back of the control, took the control assembly off, then the front door assembly. Put it together in reverse order.