Part Location Diagram of WE14M124 GE Top Bearing
See part 313 in the diagram
Replacing your General Electric Dryer Top Bearing
( Grid squares measure 1x1 inch )

Top Bearing WE14M124

Rated by 11 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$75.77
In Stock
Fix Number:
FIX1766010
Manufacturer #:
WE14M124
Manufactured by:
GE

Product Description

The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.

Videos For installing this part.

Replacing your Top Bearing

Replacing your Top Bearing

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Drum Bearing Slide - Green (Sold individually)
$14.28
Special Order
Drum Bearing Slide - White (Sold individually)
$18.57
In Stock
Duct Felt Seal
$22.35
In Stock
Light Bulb
$9.24
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.7 / 5.0, 11 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Nina from Kissimmee, FL
Parts Used:
WE14M124
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Dryer made very loud grinding sound, clothes hung up at top front of drum, then drum stopped turning.
Just like in any of the videos. Only difference was that the area around drum was too small for my hands to fit in to replace the belt. I had to remove the circuit board bridge at top of machine and move it back to allow the drum to be tipped up a sufficient distance so that I could get my hands in. Was actually able to see the idler a rm on the right side (left looking from front) behind motor to help mount belt (gave me another 6" - 8" clearance). It would have helped if the video had noted that the belt went to one of the rear groves molded into the tub. Also not really clear how the felt strip mounted around lower section (exhaust vent under filter). It seems to have a weird tie-off; and, does the flat side or narrow side go in (I put the flat side toward the front panel housing). Really good that the video noted that the ribbed side of belt went toward the drum.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Willard J from Havre de Grace, MD
Parts Used:
WE09X27634, WE1M1067, WE14M124, WE05X20431, WE1M504
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Squeaking and clothes getting caught between drum and dryer causing clothes to be damaged.
Removed screws from top and front leaving bottom screws in just loose.Front will lift off lower bottom screws to make reinstall much easier and quicker repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
darin from liberty, IN
Parts Used:
WE1M1067, WE14M124, WE05X20431, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Clothes were getting stuck up at the top of the dryer and getting ruined
I simply watched the video and ordered the replacement parts. Very easy to do and I would highly recommend doing this yourself rather than paying a repairman.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
PHILIP from MANASSAS, VA
Parts Used:
WE1M1067, WE14M124, WE05X20431, WE1M504
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Top Bearing Worn Through
I simply followed the video for this repair on youtube. The only difference was that steve left out the two screws on the back of the console that needed to be removed before the console would come off.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cindy from Callahan, FL
Parts Used:
WE1M1067, WE14M124, WE1M504
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Clothes getting caught in bearing a twisting until there's a hole or garment is damaged.
Followed the video easily enough. All but one slide was worn out and missing. Originally, I only ordered the Top Bearing and the 4 slides, but found out the felt ring had also deteriorated and needed to be replaced, so I had to place a 2nd parts order. I kept the old Top Bearing for possible future use, as it looked to be in good shape and only the slides and felt ring were worn out.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
D Brant from Ponte Vedra Beach, FL
Parts Used:
WE09X27634, WE1M1067, WE14M124, WE1M504
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Dark spots on clothes
Per the video instructions. It was fast and easy. A great service.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JAMES from VERNAL, UT
Parts Used:
WE09X27634, WE1M1067, WE14M124, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Garmets Caught Between Drum And Front Panel, Black Marks And Wear Spots On Garmets.
After unplugging the power cord, remove plastic cover from behind control panel (3 screws keep separate). Now the (2 screws) that hold the top of the dryer in place can be removed. Slide the top forward and lift it off. Unplug the control panel from the mother board, also unplug light and door switch from the wire harness (quick conn ects). The control panel can now be removed and set aside (2 screws). With the door open remove the 4 hinge screws and set the door aside. Back the screw on the bottom of the front panel out about 1/4 inch, there is one on each bottom corner just above the leveling foot. Remove the 2 screws on the top of the front panel and it can then be tilted forward until it clears the drum at which point it can be lifted off of the 2 bottom screws previously loosened. Lay the front panel flat on something soft to protect the paint. (Blanket or carpet) I bent a coat hanger into a hook and used it to hold the drum up and centered while I replaced the bearings and felt in the front panel. Using only your fingers it is possible to release the clips holding the top bearing in place. Before removing the old top bearing I assembled the new top bearing placing the black and white slide bearings to match the old ones. Remove duct felt and old top bearing and snap the new one in place being sure to clip the wires back into their same position. Replace the new duct felt seal and you are ready to put it all back together. With the door removed the front panel is much lighter and easier to handle. Slide the front panel onto the 2 bottom screws remove the hanger and reach through the front opening and hold the drum centered while you slide the front panel back into place. Once the front panel is back in place and the top and bottom screws are tightened the rest of the dryer can easily be reassembled in the reverse order as it was taken apart. All the screws used to assemble the dryer are the same except the 3 that holding the plastic cover on the back of the control panel. (Keep them separate) oh yes, the hinge screws are different too. Good luck!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GORDON from ALBERTVILLE, MN
Parts Used:
WE1M1067, WE14M124, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The Drum Makeing A Noise
Put in new parts
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
mike from Farmington, NM
Parts Used:
WE09X27634, WE1M1067, WE5M62, WE14M124, WE05X20431, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
slides and bearing worn
the parts arrived quick and they were all correct. removed the dryer face and replaced new top bearing light socket and drum slides very very easy. like a new dryer and no squeeking any more. love the price and page diagrams and quick shipping.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Clifton Springs, NY
Parts Used:
WE9M31, WE14M124
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
Dryer was sqeaking bad
I did some research online then ordered front and rear bearings. I didn't realize they came 1 in a pack, so I had to order again. Shipping was fast. When I took the dryer apart, I found the bearing was bad too. I ordered the bearing. when that arrived, it only took a few minutes to put it all back together. Assembled everything, screwed i t together and it runs quiet like new. It was pretty straight forward. Took the panel off the back of the control, took the control assembly off, then the front door assembly. Put it together in reverse order.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX1766010
Manufacturer Part Number: WE14M124
Brand
Model Number
Description
General Electric
DBVH510EH0WW
Dryer - Electric
General Electric
DBVH510EH1WW
Dryer - Electric
General Electric
DBVH510EH2WW
Dryer
General Electric
DBVH510EH3WW
Dryer
General Electric
DBVH510GH0WW
Dryer - Gas
General Electric
DBVH510GH1WW
Dryer - Gas
General Electric
DBVH510GH2WW
Dryer
General Electric
DBVH510GH3WW
Dryer
General Electric
DBVH512EF0GG
Dryer - Electric
General Electric
DBVH512EF0WW
Dryer - Electric
General Electric
DBVH512EF1WW
Dryer - Electric
General Electric
DBVH512EF2WW
Dryer - Electric
General Electric
DBVH512EF3WW
Dryer
General Electric
DBVH512EFG
Dryer - GE Dryer Model DBVH512EFG Parts
General Electric
DBVH512EFW
Dryer - GE Dryer Model DBVH512EFW Parts
General Electric
DBVH512GF0GG
Dryer - Gas
General Electric
DBVH512GF0WW
Dryer - Gas
General Electric
DBVH512GF1GG
Dryer - Gas
General Electric
DBVH512GF1WW
Dryer - Gas
General Electric
DBVH512GF2WW
Dryer - Gas
General Electric
DBVH512GF3WW
Dryer - Gas
General Electric
DBVH512GF4WW
Dryer
General Electric
DBVH512GF5WW
Dryer
General Electric
DBVH512GFG
Dryer - GE Dryer Model DBVH512GFG Parts
General Electric
DBVH512GFW
Dryer - GE Dryer Model DBVH512GFW Parts
General Electric
DBVH520EJ0WW
Dryer
General Electric
DBVH520EJ1WW
Dryer
General Electric
DBVH520EJ2WW
Dryer
General Electric
DBVH520EJ3WW
Dryer
General Electric
DBVH520EJ4WW
Dryer