Part Location Diagram of E100959 Husky Gasket Kit
See part A-B in the diagram
( Grid squares measure 1x1 inch )

Gasket Kit E100959

Works With Model 921166370!

Rated by 2 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$26.81
In Stock
Fix Number:
FIX12099358
Manufacturer #:
E100959
Manufactured by:
Husky
Works With Model 921166370!

Product Description

This is an OEM gasket kit for air compressors. The gaskets contained in this kit are designed to seal the pump assembly. These gaskets form a tight fit between components, allowing it to increase pressure. This kit includes five parts in total. The kit includes an oil crankcase seal rubber gasket, square cylinder to crankcase gasket, and three round gaskets (cylinder to valve plate gasket, the centre gasket, and the valve plate to head gasket). It is normal for these parts to wear over time and need replacement. For this repair you will need a wrench set to disassemble the pump.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gregory from ORANGE, TX
Parts Used:
E100959
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Leaking air @ head
Change & need check value !
Running great 95.%
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RICHARD from MILLSTONE TWP, NJ
Parts Used:
E100959, E100229
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench set
Compressor leaking air and hot building pressure beyond 40 PSI
Unplug the power to the compressor and drain air from tank.

1. Remove two bolts under compressor motor that hold motor to frame. This allows access to the three interior screws that are part of the motor cover.
2. Remove the 6 screws that hold the motor cover. There are 3 on the back and 3 on the front.
3. Loosen t he 4 Allen head bolts from the top of the compressor. When removing, make sure that the washers are not lost.
4. Make note of the sequence of gaskets.
5. Clean off old gasket material from head. This is PIA. Use a razor. Make sure you get all of the old gasket material off, else the repair will fail.
6. Inspect reed valves, replace is necessary.
7. Position NEW gasket material and reassemble.
8. Hand tighten Allen Head bolts.
9. Tighten head bolts with torque wrench diagonally to 12 Ft Lbs.
10. Replace compressor cover. It will NOT be necessary to replace all 6 screws, if you anticipate having to do this fix again.
11. Replace the two frame bolts.
12. Done
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX12099358
Manufacturer Part Number: E100959
Brand Model Number Description
Husky 395-226 Compressor - 395-226 #01a6b8
Craftsman 921153100 Compressor - Air Compressor
Craftsman 921153101 Compressor - Air Compressor
Craftsman 921153120 Compressor - Air Compressor
Craftsman 921153620 Compressor - Air Compressor
Craftsman 921153640 Compressor - Air Compressor
Craftsman 921164780 Compressor - Air Compressor
Craftsman 921166360 Compressor - Air Compressor
Craftsman 921166370 Compressor - Air Compressor
Craftsman 921166380 Compressor - Air Compressor
Craftsman 921166390 Compressor - Air Compressor
Craftsman 921166400 Compressor - Air Compressor
Craftsman 921169230 Compressor - Air Compressor
Husky L13HPD Compressor - 3 Gallon Portable Electric Air Compressor
Husky L13HPDPUMP Compressor - L13hpd Pump #01a545