This is an oil fill cap with a gasket seal attached. It is sold as an individual part and is used in air compressors. It connects to the crank case cover to help contain the oil inside the unit. No to...
This is an OEM gasket kit for air compressors. The gaskets contained in this kit are designed to seal the pump assembly. These gaskets form a tight fit between components, allowing it to increase pres...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
April 16, 2022
I need parts list and location to purchase.
For model number 921153101
Hello Don, thank you for your inquiry. We do need to know what parts you are looking for. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Could not find external leak, so assumed problem was in the cylinder head. I removed the big, black plastic shroud, and disconnected the line with the cooling fins leading from the cylinder head to the tank. I then unbolted the 4 Allen bolts holding the cylinder head to the cylinder body. I discovered the gasket that sits on top of the valve plate was shredded in the center piece that separates the intake port from the exhaust port. I put in new reed valves (PS10044654) and replaced the blue gasket between the cylinder and the lower valve plate and the metal gasket between the valve plates and the blue gasket on top of the upper valve plate. The gaskets are part of gasket kit PS10044723. I had to scrape the old blue gaskets off, which was the most time consuming part of the repair. I used valve grease to hold the reed valves in place during re-assembly. I did not use the gasket at the base of the cylinder or the gasket that is used for the crank case cover since neither was removed. Reinstalled the Allen bolts, the line to the tank from the cylinder head and the plastic shroud. Compressor works fine now.
Found the part at Part Select ,simply removed the worn out valve with an adjustable wrench and put new valve in, tightened it and the repair was completed, tested compressor for leaks .SAVED $149.00 by replacing a $7.00 part.
It's only 4 screws that hold on the cover. I just swapped them out. Luckily most of these cheap air compressors use the same parts. So even though this is for a craftsman air compressor, it still worked for my air stream air compressor.