This idler pulley is sold independently and includes the pre-installed bearings. It is an exact OEM replacement part for the original. This part is found in walk-behind lawn mowers to supply tension to the drive belt, allowing the belt to turn. For this repair you may require a wrench set to remove the worn idler pulley.
This idler pulley is sold independently and includes the pre-installed bearings. It is an exact OEM replacement part for the original. This part is found in walk-behind lawn mowers to supply tension to the drive belt, allowing the belt to turn. For this repair you may require a wrench set to remove the worn idler pulley.
Works with the following brands:
Husqvarna, Poulan, Jonsered
Works with the following products:
Lawn Mower, Lawn Tractor
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Aaron
June 2, 2023
Do you have a picture or detail drawing of how the all wheel drive belt is routed around the pulleys as mine was broken when I removed the cover?
For model number 967957301 00
Hello Aaron, thank you for the question. Unfortunately, we do not have the picture with us. We are providing you with some instructions that can help you remove and replace the belt:
1. Empty the fuel tank by running the machine until the tank is empty.
2. Always disconnect the spark plug before performing maintenance or accessing movable parts.
3. Turn the lawn mower on its side. Make sure the air filter and carburetor are facing upward.
4. Remove the drive cover.
5. Remove the blade bolt by turning the bolt counterclockwise. Remove the blade and attach the hardware: bolt, lock washer, and hardened washer.
6. Remove the screw and the pulley.
7. Pull out the belt and thread it over the adapter.
8. Thread the new belt over the adapter and place the belt on the engine pulley.
9. Route the belt over the stripper ring into the hole in the chassis.
10. Reinstall the transmission pulley and place the belt on the pulley.
11. Reinstall the drive cover.
12. Reinstall the blade.
13. Tighten the spark plug.
We hope this information helps!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Lawn Mower
- Husqvarna Lawn Mower Model 96145002402/2015-02 (96145002402/201502, 96145002402/2015 02) Parts
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.