Models > 7022R

7022R Husqvarna Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$11.20
This is a single black plastic clipping deflector, also sometimes referred to as a discharge chute, for a lawn mower. This part attaches to the mulcher door on the side of the lawnmower deck. It is re...
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
This is an OEM part sourced directly from Husqvarna. This handle knob is used on a variety of lawn and garden equipment. Commonly used in lawn mower to secure the handle, and in snow blowers to secure...
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
This is an OEM part sourced directly from Husqvarna. This grade 8 hex head screw is made of metal and measures approximately 3/8 - 24 x 1 ? 3/8. This screw is commonly used in lawn mowers, snow blower...
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
This blade adapter is for lawn mowers. Blade adapter attaches the mower blade to the motor shaft. Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
This idler pulley is sold independently and includes the pre-installed bearings. It is an exact OEM replacement part for the original. This part is found in walk-behind lawn mowers to supply tension t...
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
$13.69
In Stock
Order within the next 1 hr and 57 mins and your part ships today!
$6.21
In Stock
Order within the next 1 hr and 57 mins and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mark from COLUMBUS, OH
Parts Used:
581685101
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Rear drive wheels bald, no traction
9/16s inch socket, something to prop up one side of the mower (I used a plastic plant pot), and about 5 minutes was all that was needed. Undo the nut on the wheel, remove, replace it with the new one (can't mess it up - just goes on one way which is extremely obvious), replace and tighten the nut -- done. Just that simple. With the new kicks it goes up hill like a champ now (instead of spinning, especially with the grass catcher attached).
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jerome from ANNISTON, AL
Parts Used:
581952101
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
DRIVE CABLE BROKEN
REPLACED THE DRIVE CABLE.
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!