Spindle Lock 44-20-0651
$6.25
In Stock
- Fix Number:
- FIX10130993
- Manufacturer #:
- 44-20-0651
- Manufactured by:
- Milwaukee
Jump to:
Product Description
This is an authentic replacement part manufactured for use with Milwaukee circular saws. The spindle lock is an actuator used to prevent the spindle from rotating when loosening and tightening the blade bolt. This spindle lock is sold as an individual replacement part, please see model diagram for associative parts.
-
Works with the following brands:Milwaukee
-
Works with the following products:Circular Saw, Saw
- Works with the following brands:
- Milwaukee
- Works with the following products
- Circular Saw, Saw
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Keith from STREAMWOOD, IL
- Parts Used:
- 45-06-0720, 44-20-0651, 40-50-8046
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken spindel lock
Remove battery, Starting on blade side
Remove blade, top of blade housing, use snap ring pliers remove large snap ring. and aluminum back plate,once inside locate the gear box which broken
Spindle is. Remove screws make sure all metal parts are cleaned install new parts in reverse order.
Remove blade, top of blade housing, use snap ring pliers remove large snap ring. and aluminum back plate,once inside locate the gear box which broken
Spindle is. Remove screws make sure all metal parts are cleaned install new parts in reverse order.
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10130993
Manufacturer Part Number: 44-20-0651
Manufacturer Part Number: 44-20-0651
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 2630-20 | Circular Saw - 18 Volt Circular Saw |
| Milwaukee | 2630-22 | Circular Saw - 18 Volt Circular Saw |
| Milwaukee | 2730-059 | Saw - Milwaukee 2730-059-(F70a) Parts |
| Milwaukee | 2730-20 | Circular Saw - Cordless M18 Fuel Circular Saw |
| Milwaukee | 2730-21 | Circular Saw - Cordless M18 Fuel Circular Saw |
| Milwaukee | 2730-22 | Saw - Milwaukee 2730-22-(F31a) Parts |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.