Part Location Diagram of 089006017053 Ryobi Switch
See part A-17 in the diagram
( Grid squares measure 1x1 inch )

Switch 089006017053

Rated by 1 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$8.10
In Stock
Fix Number:
FIX10076961
Manufacturer #:
089006017053
Manufactured by:
Ryobi

Product Description

It is a genuine item that is supplied by the original equipment manufacturer for use with Ryobi compound miter saws. The switch allows a user to turn the unit on and off, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality switch is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Diane M from FERNANDINA, FL
Parts Used:
89006017054, 089006017053
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
switch and trigger for saw stopped working
1, unplug saw
2. take out all 7 screws on the saw handle
3. separate handle as best you can-(it will not come apart completely) so place 2 or 3 wood shims between handle parts to be able to access trigger and switch
4. unplug 3 wires attached to black switch and pull out both yellow trigger and black switch. (pat attenti on to how the black switch sits on the yellow trigger
5. replace with new trigger and switch-you have to pay attention to existing holes in the handle that hold the trigger in place and make sure the small black button on the bottom of the switch rests on the small shelf on the top of yellow trigger-also wires have slots to hold them in place as well
6. take out shims but don't put screws back yet and test-if not running-re- check the little button on the bottom of the switch to make sure it hits the little shelf on the trigger correctly ( had to do this 2X to get it right.)
put it back together
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX10076961
Manufacturer Part Number: 089006017053
Brand Model Number Description
Ryobi TS1344L Miter Saw - Miter Saw
Ryobi TS1344LG Miter Saw - 10-Inch Compound Miter Saw
Ryobi TS1345L Miter Saw - 10-In. Compound Miter Saw
Ryobi TS1346 Miter Saw - 10-Inch Compound Miter Saw
Ryobi TS1346T Miter Saw - 10-Inch Compound Miter Saw