Watch the install video
1570070-1-M-Whirlpool-12001541-Drum Support Roller Kit
Part Location Diagram of 12001541 Whirlpool Drum Support Roller Kit
See part 7 in the diagram
Replacing your Maytag Dryer Drum Support Roller Kit
1570070-1-S-Whirlpool-12001541-Drum Support Roller Kit 360 view
( Grid squares measure 1x1 inch )
1570070-1-S-Whirlpool-12001541-Drum Support Roller Kit 1570070-2-S-Whirlpool-12001541-Drum Support Roller Kit 1570070-1-S-Whirlpool-12001541-Drum Support Roller Kit 360 view
Part Location Diagram of 12001541 Whirlpool Drum Support Roller Kit Replacing your Maytag Dryer Drum Support Roller Kit

Drum Support Roller Kit 12001541

★★★★★
★★★★★
10 Reviews

Rated by 65 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$13.49
In Stock
Fix Number:
FIX1570070
Manufacturer #:
12001541
Manufactured by:
Whirlpool
Product Description
This OEM drum support roller kit contains the parts needed to replace one roller on your dryer. This kit includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once for optimal performance. The drum support roller holds the drum in position while it spins on the support wheels. It rotates on the roller shaft located on the rear bulkhead. It may need to be replaced if your dryer is noisy, will not tumble, leaves marks on clothes, or will not start. This part is prone to wear and tear, and if broken will need to be replaced. This part measures roughly 3 inches in diameter and is made of plastic, metal, and rubber. Each kit is sold individually (two would be needed to replace both drum support rollers, which is recommended).
Works with the following brands:
Maytag, International, Jenn-Air, Crosley
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Noisy, Marks left on clothes, Drum Not Spinning
Part Number Cross Reference
Part# 12001541 replaces these:
AP4008534, 400518, 12001541, 12001541, 12001541VP, 3-3373, 303373, K35-248, W10116741, Y303373
2 Installation Videos 12 Related Parts 1 Question and Answer 65 Installation Instructions ★ 10 Customer Reviews Model Compatibility
Product Description Part Videos Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

This OEM drum support roller kit contains the parts needed to replace one roller on your dryer. This kit includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once for optimal performance. The drum support roller holds the drum in position while it spins on the support wheels. It rotates on the roller shaft located on the rear bulkhead. It may need to be replaced if your dryer is noisy, will not tumble, leaves marks on clothes, or will not start. This part is prone to wear and tear, and if broken will need to be replaced. This part measures roughly 3 inches in diameter and is made of plastic, metal, and rubber. Each kit is sold individually (two would be needed to replace both drum support rollers, which is recommended).

  • Works with the following brands:
    Maytag, International, Jenn-Air, Crosley
  • Works with the following products:
    Dryer, Washer Dryer Combo
  • Fixes the following symptoms:
    Noisy, Marks left on clothes, Drum Not Spinning
  • Part# 12001541 replaces these:
    AP4008534, 400518, 12001541, 12001541, 12001541VP, 3-3373 , 303373, K35-248, W10116741, Y303373 Show less

Videos For installing this part.

Replacing your Drum Support Roller Kit

Replacing your Drum Support Roller Kit

Replacing your Drum Support Roller Kit

Replacing your Drum Support Roller Kit

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Solomon
June 16, 2022
Dryer makes a huge noise. Was told it is probably the blower wheel. Problem is I believe there are two models which both claim to fit this model. One is threaded and one, not. How do I know which one to order?
For model number MDG8426agw
Fix.com logo
Hi Solomon, Thank you for your question. Both blower wheels are threaded. If your blower wheel has a d-shaped shaft, you will need to order part number FIX2035614. If your wheel has a threaded drive hub, you will need to order part number FIX11741126. If you need help placing an order for one of these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Blower Wheel
$81.31
In Stock
Blower Wheel
$54.49
In Stock
Front Glide Kit
★★★★★
★★★★★
(3)
$14.69
In Stock
Part Number: FIX1804752
This part is located on the front bulkhead of the dryer and helps the drum to rotate smoothly and quietly. If you notice a screeching or metal-on-metal noise while your appliance is operating, you may need to replace the...
Tumbler and Motor Belt
★★★★★
★★★★★
(9)
$32.39
In Stock
Part Number: FIX11757542
This is a single OEM dryer drum belt. It measures 100 inches in length, 3/8 of an inch wide and has five ribs and four grooves. Keep in mind that this rubber drum belt will stretch over time, so if you are comparing your...
Roller Shaft
$9.80
In Stock
Part Number: FIX11743031
The roller shaft is also known as a support roller shaft or a drum roller axle. It is a part in your dryer that the drum rollers spin on, helping your dryer to tumble. If your appliance is noisy while operating, or will ...
Multi Rib Belt - 91-5/8 Inches
★★★★★
★★★★★
(2)
$28.34
In Stock
Part Number: FIX11741110
If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. This genuine OEM mult...
Retaining Ring
$7.87
In Stock
Part Number: FIX11746909
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or ...
Idler Pulley Wheel and Bearing
★★★★★
★★★★★
(1)
$22.09
In Stock
Part Number: FIX11743032
If your dryer is making excessive noise, or it will not tumble, there may be an issue with the idler pulley wheel. The idler pulley wheel is attached to the idler bracket and is used to secure the dryer drum belt, which ...
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Sold individually.
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638
There are 6 tablets in each package and it is suggested to use every month. These keep the dishwasher fresh by dissolving and removing odor.
View More View Less
Front Glide Kit
$14.69
In Stock
Part Number: FIX1804752
Tumbler and Motor Belt
$32.39
In Stock
Part Number: FIX11757542
Roller Shaft
$9.80
In Stock
Part Number: FIX11743031
Multi Rib Belt - 91-5/8 Inches
$28.34
In Stock
Part Number: FIX11741110
Retaining Ring
$7.87
In Stock
Part Number: FIX11746909
Idler Pulley Wheel and Bearing
$22.09
In Stock
Part Number: FIX11743032
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 65 reviews.
  • 1
  • 2
  • 3
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
James from Gainesville, GA
Parts Used:
WPY312959, WP6-3037050, 306508, 12001541
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
"Sqealing" noise when drum rotating
Disconnected power supply, removed front panel, removed tub support bracket, removed electrical lines from light and door switch( to have better access to install front guide kit), removed belt, removed drum, removed old rollers, installed new rollers and rest of installation was in reverse order of taking machine apart. In order to insta ll the front guide kit(which I've never done before), I had to watch the installation instructions via you-tube. This was a tremendous aide as the instructions were simple and very adequate.
Read less
27 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Novi, MI
Parts Used:
WP6-3129480, WP6-3037050, WPY312959, WPY312527, 306508, 12001541, WP9703438, WP354987
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Squeaking noises while running dryer
Followed the Video Directions from website. All went as planed. The dryer is running like new now.
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tim from PORTLAND, OR
Parts Used:
WP6-3700340, WP6-3129480, WP33002535, 306508, 12001541, WP9703438
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Dryer was a bit noisy with a full load of wet clothes
As per the repair videos on the site, I searched the internet for a couple of supplementary videos just to make sure I was doing it correctly. It was was all pretty easy. Expect to vacuum out and clean out the interior of the dryer. Also, to make things easier, disconnect the bulkhead and exterior like in the video, but also keep the top flipped up until reassembling, it'll make it much easier. When reinstalling the belt, remember how the belt is going to go around the pulley, you'll have to do this without sight as the barrel will the way and you won't be able to see what you're doing. It's really not hard but just keep this in mind. Also, as you disassembling, it would help to snap some pictures of where each screw goes and how; reassembly was a tiny bit tricky as I didn't do this.
Read less
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Shawn from Plano, TX
Parts Used:
WP6-3700340, WP33002535, 12001541
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Squeaky
Followed youtube tutorials, pretty straightforward. Take pictures of where wires connect for door switch, light, et al. Have a shop-vac handy to vacuum all the dust, lint, dog hair, etc that's accumulated over the years inside the unit.My spreader c-clip pliers were not small enough to fit in the holes of those tiny c-clips,had to improvi se.Used steel wool to polish all roller shafts, Before re-installing drum and belt, orient yourself to this procedure by practicing threading belt properly before positioning the drum in your way!
Read less
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Springfield, IL
Parts Used:
WP6-3037050, WPY312959, 12001541
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
broken dryer belt.
I followed the instructions on each part that was sent to me. I've taken the front and tumbler assembly off before, so that was already easy. The tip that is not offered that makes a huge difference in replacing the belt is this. Make sure that you take the belt out if the bag and let it rest for a few minutes before installing. Also, m ake sure that you have the ribbed side of the belt facing up on the tumbler. It is easier to get it right while the tumbler is out of the unit than when it's inside and you are working in a 1 foot section.
Read less
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Franklin from Indianapolis, IN
Parts Used:
WPY312959, 12001541
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Noisy Drum while drying.
Replaced the wheels at the back and also the belt. ( I also removed the lint buildup around the drum felt and on the heating chamber and motor. That alone helped the noise problem. I did this prior to ordering parts, as I had taken it apart to see what the problem might be.)I don't have any additions to what I saw in the repair video. Tha t video showed me all I needed to do. Great video. First time the dryer has been worked on since it was purchased in about 1984. We were a family of 6, so its good stuff.
Read less
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from SANTA ROSA, CA
Parts Used:
WP6-3129480, WP33001003, 12001541
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
My drier was making rumbling noises.
I followed the video instructions, which were great by the way. Pretty easy to remove the front panel, then housing, then belt, then drum to expose drum support rollers and shafts. Removed old and replaced with new after cleaning lint up a bit. Unfortunately, there is still a bit of a rumble when the drier starts up. I fully expected the changed out parts to make a difference, but it was only a modest improvement. I need to do further trouble shooting and diagnosis.
Read less
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Myrtle Beach, SC
Parts Used:
WP22002263, 12001541, WP9703438
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer would squeek loudly
Removed door, and front bezel. Write the colors of the wires next to the door switch and the moisture sensor on the bezel so that you can remove the wires, this makes it easier. Lifted top up and pulled drum out, but did not remove belt. Inspected wheels and roller shaft. Needed to replace (2) Roller Wheels, (1) Roller Shaft, (2) Retainin g Rings, & (2) Shaft Washers. Ordered parts from the site. Removed the Retaining rings. The retaining ring tool I bought from the hardware store did not fit the holes in the retaining ring, so I had to file the tips down. Once the retaining rings are removed, the washers and rollers come off easily. The Roller Shaft can be removed by loosening the nut on the back side of the shaft. Inserted new shaft and tightened nut, then replaced both rollers, and washers, and reinstalled the Retaining rings. Put drum back in place, tied all wires back in and reinstalled front bezel and door.
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JOE from HIGHLAND, IN
Parts Used:
WP6-3705180, WP6-3700340, WP33002535, 306508, 12001541
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Hella Loud
1st off, watch all the video's they supply even before you buy the parts. A lot of knowledge in them. It helped to ensure I bought the right parts to begin with. I removed the front of the machine, removed the brackets holding the lid down. Raised the lid, and did an inspection of everything. Removed the front so I could remove the drum. Once that was down, piece of cake. I got out the vacuum, vacuumed out everything, then moved to removing the rollers. Because my tool broke to remove the retaining clip from the front, I had to use a 1/2" wrench to removed the roller studs. Rebuilt the drum support rollers, and put them back on. Next was the idler pulley wheel and bearing and idler arm and shaft. Another piece of cake. I decided to not replace the front glide as it looked fine. NOW THE TRICKY PART. Putting the new belt on and putting the drum back in. Watched that video 4 times. Finally got it. Of the little over two hours, 30 minutes was spent on this part. Put everything back together from there a cake walk. YOU DO NOT NEED TO REMOVE ANY WIRES FROM ANYTHING EITHER. Hope this helps.
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ken from Raytown, MO
Parts Used:
WPY312959, 12001541
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Dryer was very noisy due to worn drum rollers.
For belt installation, I found that pushing the belt rearward into the drum roller groove made it much easier to get the belt over the idler pulley. Once I had it over the idler pulley it was a simple matter to slide the belt forward into it's normal operating position.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
★ Customer Reviews
Average Rating: (10 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5★
    10
  • 4★
    0
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Larry G - July 15, 2024
Verified Purchase
Easy
It was easy my 12 yr old helped me.
★★★★★
★★★★★
Thane R - March 16, 2022
Verified Purchase
Squeaking No More!
I’ve made a few repairs to my old Maytag dryer. I knew I was going to be replacing a few things and my old roller bearing was seizing and squeaking. I ordered this part and replaced it fairly easy. There is a little clamp that holds the roller on that was a bit of a pain without proper tools. I did get it though by using a flat screwdriver and prying towards me to pop it off. Ever since replacing the part, I no longer have a noisy dryer.
★★★★★
★★★★★
Michael A - September 29, 2021
Verified Purchase
Perfect
Parts arrived in timely fashion. Contained everything necessary to repair dryer.
★★★★★
★★★★★
Jeffrey I - September 4, 2021
Verified Purchase
Easy
Worked as it should. Easy repair.
★★★★★
★★★★★
Roland F - September 3, 2020
Verified Purchase
Excellent buy!!
Smooth- good deal
★★★★★
★★★★★
BILL H - July 15, 2020
Verified Purchase
DRYER ROLLERS
A-OKAY
★★★★★
★★★★★
David D - June 24, 2020
Verified Purchase
Harvey home.owner
Was the exact replacement part
★★★★★
★★★★★
Jason H - February 5, 2020
Verified Purchase
Noisy dryer? Here's a fix
Opened up my dryer and found out one of my rollers was rusted out. Greased up the shaft and put on this roller. Keep in mind your dryer might need two new rollers, mine had one good and one bad. After watching DIY YouTube videos I put this together myself in a couple hours. 10/10 dryer runs how it should, quieter than ever!
★★★★★
★★★★★
Andrew E - December 12, 2019
Verified Purchase
Arrived sooner than anticipated!
The part arrive two days earlier than shipping expected and was a perfect fit. No more howling clothes dryer.
★★★★★
★★★★★
Jeffery C - September 11, 2019
Verified Purchase
Perfect
Work perfectly just replacing the right hand bearing. Squeak removed. Very quiet.

Model Compatibility

This part works with the following models:
Fix Number: FIX1570070
Manufacturer Part Number: 12001541
Brand
Model Number
Description
Crosley
CDE4205AYJ
Dryer - Residential
Crosley
CDE4205AYW
Dryer - Residential
Crosley
CDE4205AZJ
Dryer - Residential
Crosley
CDE4205AZW
Dryer - Residential
Crosley
CDG4205AWJ
Dryer - Residential
Crosley
CDG4205AWW
Dryer - Residential
Maytag
DE106
Dryer - Electric
Maytag
DE107
Dryer - Electric
Maytag
DE110
Dryer - Electric
Maytag
DE180
Dryer - Maytag Dryer Model DE180 Parts
Maytag
DE18CA
Dryer - Electric
Maytag
DE18CM
Dryer - Electric
Maytag
DE18CS
Dryer - Electric
Maytag
DE18CT
Dryer - Electric
Maytag
DE19CA
Dryer - Electric
Maytag
DE19CD
Dryer - Electric
Maytag
DE19CS
Dryer - Electric
Maytag
DE19CT
Dryer - Electric
Maytag
DE210
Dryer - Electric
Maytag
DE212
Dryer - Residential
Maytag
DE21CA
Dryer - Electric
Maytag
DE21CM
Dryer - Electric
Maytag
DE21CS
Dryer - Electric
Maytag
DE21CT
Dryer - Electric
Maytag
DE22CA
Dryer - Electric
Maytag
DE22CS
Dryer - Electric
Maytag
DE22CT
Dryer - Electric
Maytag
DE23CD
Dryer - Electric
Maytag
DE24CA
Dryer - Electric
Maytag
DE24CM
Dryer - Electric
Drum Support Roller Kit
$ 13.49
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.