OEM Maytag Dryer High Temperature Adhesive - 2oz. [WPY055980] | Ships Today | Fix.com
High Temperature Adhesive - 2oz. – Part Number: WPY055980
High Temperature Adhesive - 2oz. – Part Number: WPY055980 High Temperature Adhesive - 2oz. – Part Number: WPY055980 https://fixcom.azureedge.net/Schematics/Maytag/MA34B4.gif

High Temperature Adhesive - 2oz.

Your Price
$19.74

Fix Number: FIX11757492

Manufacturer #: WPY055980

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individually. This is an OEM product sourced directly from the manufacturer.

Works with the following brands

Maytag, Jenn-Air

Works with the following products

Dryer, Washer

Fixes the following symptoms

Noisy | Shakes and moves | Marks left on clothes | Takes too long to dry

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.6 / 5.0, 6 reviews
Customer:
Ralph from Alexandria, OH
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Grinding , drum flopping , .....noise !
I won't go into all the details of the repairs .....The videos this company provides are A+++.. Some would say I would have been better off purchasing a New dryer ...LOL if I had to use a appliance repair man for this job ...Probably ...but ...using this site certified parts , and using the easy to follow instruction videos ....It was truly a very easy repair . I spent more time getting everything perfectly clean inside the dryer housing ,and letting the high temp adhesive cure than I did actually installing the parts.I can't recommend this company or the parts more ...Just take your time with removal , cleaning , and installation ....Patience !Excellent ...parts quality , shipping speed , and video installation instructions !!!! My dryer now works and SOUNDS like a new dryer ....Thank you !
5 of 5 people found these instructions helpful

Were these instructions helpful?   

Customer:
Stephen from Lakeland, FL
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
1980 Maytag tub/basket wobble on spin, tub off center when stopped
After removing the front panel I found one damper pad was hanging half out. After lifting the tub with a piece of 4x4 PVC found a second pad totally gone. Suggestions: use the 4x4 lift method works fine if you position the washer so you can remove the rear round access panels and work behind the washer to clean/install the rear pad. A short piece (6" roughly) of 2x4 or similar works good to "prop" the whole tub forward to re-attach the front spring last. Replacing pads and belt didn't cure the tub/basket wobble but then tuning-adjusting the springs tensions nuts individually with (and without) a load in the tub on spin did re-center the tub and equalized-reduced somewhat (40%?) the amount of tub-basket spin balance wobble. Yes the washer is leveled very carefully in both axis. Replaced the original motor tension springs and (worn!) drive belt to hopefully extend the life. DEFINITELY worth the effort to keep my wife happy!!!!
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Ray from Olive Branch, MS
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
My washer was making a squeaky noise and vibrating on the rinse cycle.
I unplugged the washer then took the front cover off and took the screws holding the lid out. Then i leaned the washer back against the wall and unscrewed the nuts holding the 3 tub hold down springs. These look like 2 seperate nuts, 1 on top and 1 under the washer bottom but it is 1 long body nut so just put the socket on the bottom and back it all the way off. Then Take the drive and pump belts off and put blocking down under the tub pulley and pull the washer back down so the tub is resting on the Blocking, this will raise it up enough to clean the cone hub where the damper pads go. I used a mirror propped up inside the back of the washer to see the back side of the damper area to clean and install the new pads.The kit does not come with the glue needed to put the pads back on so don't forget to order it with the parts. Also the glue does not give a full cure time so i gave it 24 hours to be sure it was set. then i started putting everything back together. The tub springs gave me the most trouble. I was able to get 1 on easy but the other 2 i had to use a clamp on the support to the spring and use a pry bar to hold the spring down far enough to start the nut back on. But after that it all went easy and quick.This site does a great job with all the helpful instructions, pictures and videos.
1 of 2 people found these instructions helpful

Were these instructions helpful?   

Customer:
john from manorville, NY
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
My dryer started making noise, rough metal on metal sound and clothes took a couple cycles to dry.
Looked in the back of the dryer and rear drum felt was already falling apart so I ripped it out. We actually ran it a couple times without the felt ( do not do this!) Wound up grinding off some metal. My advice is look up a video on whatever repair your doing. Once I removed the drum my felt seal unlike most videos I watched attached to the back of my dryer and not to the drum itself. Scrape off old adhesive and apply new adhesive which will be recommended if your purchasing felt.my felt seal once its glued on it folds over itself. Slide drum over felt reattach your belt and even with my grinded out metal it ran like new.This site made my repair easy with timely delivery and helpful videos. Hope this helps someone.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
gary from worth, IL
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Noise while running
r&r front and drum. glue in new seal. watching video really helped.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Lemuel from Walpole, MA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Blower wheel is cracked and the front glide bearing is worn out
1. remove the cover from the front by unscrewing two screws in the bottom. 2. remove the cover for the blower wheel by unscrewing around 7 screws 3. remove the clip and the c-clip and pull the blower wheel. 4. replace the blower wheel with a new one and reinstall the rest.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX11757492
Manufacturer Part Number: WPY055980
Brand
Model Number
Description
Maytag
66CB
Dryer - Gas
Maytag
67C
Dryer - Gas
Maytag
741C
Dryer - Residential
Maytag
742C
Dryer - Residential
Maytag
76CB
Dryer - Gas
Maytag
77C
Dryer - Gas
Maytag
A100S
Washer - Top Loading
Maytag
A101
Washer - Top Loading
Maytag
A102
Washer - Top Loading
Maytag
A102S
Washer - Top Loading
Maytag
A103
Washer - Top Loading
Maytag
A103S
Washer - Top Loading
Maytag
A108
Washer - Top Loading
Maytag
A108S
Washer - Residential
Maytag
A15CA
Washer
Maytag
A15CM
Washer
Maytag
A15CT
Washer
Maytag
A16CA
Washer
Maytag
A16CM
Washer
Maytag
A16CT
Washer
Maytag
A200
Washer - Top Loading
Maytag
A200S
Washer - Top Loading
Maytag
A202
Washer - Top Loading
Maytag
A202S
Washer - Top Loading
Maytag
A203
Washer - Top Loading
Maytag
A203S
Washer - Top Loading
Maytag
A208
Washer - Top Loading
Maytag
A208S
Washer - Residential
Jenn-Air
A300
Washer - Jenn Air Washing Machine Model A300 Parts
Maytag
A300S
Washer - Top Loading