OEM Amana Dryer Drum Support Roller [WP37001042] | Ships Today | Fix.com
Drum Support Roller – Part Number: WP37001042
Drum Support Roller – Part Number: WP37001042 https://fixcom.azureedge.net/Schematics/Maytag/58910.gif

Drum Support Roller

Your Price
$9.39

Fix Number: FIX11741913

Manufacturer #: WP37001042

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This single drum support roller is used for square ported model clothes dryers. It has a metallic bearing in its center.

Works with the following brands

Amana, Maytag, Speed Queen, Crosley, Magic Chef, Admiral, Kenmore

Works with the following products

Dryer

Fixes the following symptoms

Noisy | Will not tumble | Will Not Start | Takes too long to dry

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 28 reviews
>
<
Customer:
Rachel from Berrien Center, MI
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Drum was not working properly
It was very easy to installed new parts.
9 of 9 people found these instructions helpful

Were these instructions helpful?   

Customer:
Haley from Mitchell, NE
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench (Adjustable)
Loud squealing and delayed drum rotation at start
Followed the online repair demonstration videos. Lifted the top using putty knife to release: slid in between top panel and front panel. There is one on the left and one on the right. (Press toward back of dryer and lift lightly on the top for each side, releasing both sides and lift up. Rest on wall behind dryer). Photographed wires before disconnecting. Used nut driver to unscrew the front panel,one screw on each side. Lifted and pulled, and removed. Did the same for the inner part that holds the front of the drum. Four screws total there. Removed the drum by first reaching in under the drum and freeing the belt from the pulley, then pulling drum straight forward. Removed and replaced idler pulley with crescent wrench and socket. Removed and replaced drum rollers using snap ring pliers (these were only slightly worn, but ordered and replaced anyway since they were affordable) and added a little machine oil for good measure. Returned the drum, then put on new belt (using the video to be sure of correct placement and installation) and reassembled dryer, referring to the pics I took of the wires. Works like brand new now! Loved the videos! Very easy to follow!
4 of 4 people found these instructions helpful

Were these instructions helpful?   

Customer:
Scott from Beaumont, TX
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench set
High-pitched squeak during first 2-3 minutes of drying
I knew right away that some rollers were bad. So, I decided to do a total "rebuild" while I had the dryer apart. I.e., any part pertaining to movement of the drum. So, I replaced the 2 rear rollers, idler pulley, front glides and drum drive belt. Why not? You're already in there - just do it all, and you're good for maybe another 10 years. One thing they don't tell you in the videos, but you really should do; add some grease to the shafts for the rear rollers and on the shoulder bolt that holds the idler pulley in place. Don't "slather" it in there; I used a wooden toothpick to put a small amount for the roller shafts and shoulder bolt. It's best to use something that can stand high heat. I used STL Pipe Thread grease; but any good, high-heat grease will do. Also, take the time to vacuum out the inside of the dryer, and ALL air paths. Especially the front Lint Duct Assembly. Mine was so full of lint, it was almost blocking the blower wheel. It was so packed, it was mostly blocking the thermal limit switch!!. That could cause the dryer to over heat, and catch all that lint on fire. Clean it good, and it'll take less running time to dry your clothes. I could tell the difference.
3 of 4 people found these instructions helpful

Were these instructions helpful?   

Customer:
Robert from Homewood, IL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Drum not turning
As per your video
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Daniel from Manchester, NH
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Very noisy when turning
Idler Lever was obviously totally gone and causing most of the noise. Videos are excellent. Just follow them carefully.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Joseph from Tucson, AZ
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Noisy dryer from an obvious part(s) failure.
Removed eight ?" screws (8A X 3/8 Hex Washer Head Tapping) starting with two at bottom kick panel, then two at dryer door panel; disconnect electrical connectors to release door panel from dryer body; remove four screws from dryer opening bulkhead to expose drum and blower impeller; remove two screws securing top dryer panel to side panels; reach inside right lower access to release dryer belt from idler wheel; lift top panel a little while pulling out bulky drum. Vacuum the heck out of the inside. Even better, do all this outside and take compressed air to the inside. Because this dryer was 19 years old, all three rollers (drum, idler wheel), guides (2), felts(2), and belt were replaced. The noise was caused by seized rollers but all rubber on rollers and belt was cracking, so best to change such old worn out parts. Don't forget to lube all shafts with oil (plumbers silicone best), then reassemble...js
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Larry from Ocala, FL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Noise
Best thing was to tape belt in place on the drum prior to putting back in place, after belt pulley was connected tape was removed. Much easier than trying to install the belt after drum installed.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Diana from ShowLow, AZ
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
I noticed the dryer was becoming noisy and had a bump noise when running.
I followed the video instructions and the replacement of the parts was pretty simple. NIce instruction video. The guy is an artist. Thanks.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Michael from Meno Falls, WI
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Noisy dryer
followed yor videos ,they were perfect ,thank you
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
reginald from mount holly, NJ
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
Noisy when operating
followed instructions in vidios for belt and idler pulley and tub support rollers model in vidios different but came apart basicly the same way. dryer is 17 yrs old, glad to find parts runs quiet as new idler pulley and shaft not worn replaced anyway only belt and left hand tub support roller and shaft were worn
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Lee from Lexington, MA
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Dryer got too hot then drum got noisy
The video was very helpful except that the instructions for removing the top were for a different Maytag model than mine although it referenced the same model number. The front of my unit had two panels whereas the video showed a model with one panel. The replacement of the thermostats went smoothly. I had some difficulty getting the belt on the correct side of the tension wheel. A drawing of picture would have helped. I could not replace the rollers as had wished because I did not have a tool to remove the retaining ring. I was pleased that the parts arrived within a day of my ordering them.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Ralph from Harrington Park, NJ
Parts Used:
  • Drum Support Roller
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
When the dryer is on it made a terrible squeaking noise
watched the video provided below the part needed on this site. removing the drum was a little tricky and be careful of the sensors below the drum. You will need someone to hold the drum up while you reinstall the belt other tha that it was relatively simple.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jake from Eureka, NV
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
Noisy dryer and slipping belt
No problems. Only the idler pulley seemed to be the issue but since I had the dryer disassembled and all of the parts, I replaced them all so I don't have to do it again any time soon. Watched all the installation videos before tearing into it - they were very helpful and I didn't have to deviate at all from their instruction.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Allan from Rockford, IL
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Drum froze up breaking the belt
remove top and from panel pulled out drum pulled out idler pulley drum support roller then just reverise
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
George from Edgewater, FL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Belt slipping
watched video twice!!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX11741913
Manufacturer Part Number: WP37001042
Brand
Model Number
Description
Kenmore
106M12A-F
Refrigerator - COLDSPOT REFRIGERATORS
Kenmore
106M12P-F
Refrigerator - COLDSPOT REFRIGERATOR
Kenmore
106M12S-F
Refrigerator - COLDSPOT REFRIGERATOR
Admiral
ADE7005AKW
Dryer - Residential
Admiral
ADE7005AYW
Dryer - Residential
Admiral
ADE9005AGW
Dryer - Residential
Admiral
ADG7005AWW
Dryer - Residential
Speed Queen
AEM197
Dryer - Residential, Automatic
Speed Queen
AEM377
Dryer - Residential, Automatic
Speed Queen
AEM397
Dryer - Residential, Automatic
Speed Queen
AEM407L
Dryer - Residential, Automatic
Amana
AEM407L2
Dryer
Speed Queen
AEM407L2-PAEM402L2
Dryer - Speed Queen Dryer Model AEM407L2-PAEM402L2 (AEM407L2PAEM402L2, AEM407L2 PAEM402L2) Parts
Speed Queen
AEM407W
Dryer - Residential, Automatic
Amana
AEM407W2
Dryer
Speed Queen
AEM407W2-PAEM402W2
Dryer - Speed Queen Dryer Model AEM407W2-PAEM402W2 (AEM407W2PAEM402W2, AEM407W2 PAEM402W2) Parts
Amana
AEM427L2
Dryer
Speed Queen
AEM427L2-PAEM427L2
Dryer - Speed Queen Dryer Model AEM427L2-PAEM427L2 (AEM427L2PAEM427L2, AEM427L2 PAEM427L2) Parts
Speed Queen
AEM427W
Dryer - Residential, Automatic
Amana
AEM427W2
Dryer
Speed Queen
AEM427W2-PAEM427W2
Dryer - Speed Queen Dryer Model AEM427W2-PAEM427W2 (AEM427W2PAEM427W2, AEM427W2 PAEM427W2) Parts
Amana
AEM477L2
Dryer
Speed Queen
AEM477L2-PAEM477L2
Dryer - Speed Queen Dryer Model AEM477L2-PAEM477L2 (AEM477L2PAEM477L2, AEM477L2 PAEM477L2) Parts
Speed Queen
AEM477W
Dryer - Residential, Automatic
Amana
AEM477W2
Dryer
Speed Queen
AEM477W2-PAEM477W2
Dryer - Speed Queen Dryer Model AEM477W2-PAEM477W2 (AEM477W2PAEM477W2, AEM477W2 PAEM477W2) Parts
Speed Queen
AEM497L
Dryer - Residential, Automatic
Amana
AEM497L2
Dryer
Speed Queen
AEM497L2-PAEM497L2
Dryer - Speed Queen Dryer Model AEM497L2-PAEM497L2 (AEM497L2PAEM497L2, AEM497L2 PAEM497L2) Parts
Speed Queen
AEM497W
Dryer - Residential, Automatic