Part Location Diagram of WD22X10047 GE Lower Spray Arm - Gray
See part 501 in the diagram
Replacing your General Electric Dishwasher Lower Spray Arm - Gray
( Grid squares measure 1x1 inch )

Lower Spray Arm - Gray

Rated by 2 customers 

?

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$137.04
In Stock
Fix Number: FIX1020205
Manufacturer #: WD22X10047
Manufactured by: GE

Product Description

The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approximately 20 inches in width. The lower spray arm will not spin if it has become clogged with debris and hard water deposits from your dishwasher, if it has become jammed by silverware, causing it to melt, or if the bottom of the spray arm has become disconnected from the bottom of the tub. If the spray arm encounters any of these issues, it will need to be replaced. To replace the spray arm, remove the lower dish rack and simply unscrew the old arm. Screw the new spray arm in until it locks into place.

Videos For installing this part.

Replacing your Lower Spray Arm - Gray

Replacing your Lower Spray Arm - Gray

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dishes not clean after cycle
Replaced all three spray arms, super easy. Lower arm first. Pull up slightly and turn counter clockwise a quarter turn and it will lift up and off. Reverse this step to reinstall. Next the middle arm. Use a 1/4 nut driver on the screw in the middle of the arm unscrew it the bearing (which is actually a flat washer) and the arm will come straight down. Again reverse to reinstall. Pretty much the same process for the upper arm except there's a bushing insert in the middle which the screw goes through. Which I also replaced. 15 minutes at the most to complete. Super easy.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Doug from Phoenix, AZ
  • Parts Used:
    WD22X10047
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Lower Spray arm was filled with food debree.
I first watched a short video, and once you see this, it was a matter of a few minutes to change.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX1020205
Manufacturer Part Number: WD22X10047
Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher