Part Location Diagram of 1188814 Whirlpool Bucket Water Level Switch
See part 13 in the diagram
( Grid squares measure 1x1 inch )

Bucket Water Level Switch 1188814

Works With Model AD50G1!

Rated by 1 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$64.21
Special Order
Fix Number:
FIX992307
Manufacturer #:
1188814
Manufactured by:
Whirlpool
Works With Model AD50G1!

Product Description

This part is used to prevent water overflow when the bucket gets full.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Bernard from Bridgewater, NJ
Parts Used:
1188814
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Swap out bucket water level switch
The Bucket Water Switch Level Failed. The switch which tells of a fulI water bucket failed the light light would stay on and the dehumidifier would not run even if the bucket was empty.I ordered the part from this site using the model # and manufacturer.Since The part as instock it arrived quickly. To repair/Replace switch first unplug t he unit, then unscrew with phillips head screw driver all outer housing screws. The swich is in a plastic holder attached to an inside wall. first label the 3 wires and where they are attached to the switch. Disconnect the wires from the switch.Pinch the switch holder and pull out switch and holder from the front of the unit. The new switch holder is different in my old model so i removed the switch from the new holder and placed it in the old holder. Now slide the new switch back into the unit from the front until it snaps in firmly. Attach the labeled wires to the switch contacts. Place the metal side housing back in place and screw on. Attach the top of the unit by aligning it with the hole on the top of the unit slide it back on the unit it sould lock into place. Plug the unit in and press the little plunger in and the light on top will illuminate and the unit will stop running
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX992307
Manufacturer Part Number: 1188814
Brand Model Number Description
Kenmore 10657250790 Dehumidifier
Kenmore 10657300790 Dehumidifier
Kenmore 10657400790 Dehumidifier
Kenmore 10657500790 Dehumidifier
Whirlpool 4AD50DSL1 Dehumidifier
Whirlpool 4AD50J0 Dehumidifier
Whirlpool AD025SG0 Dehumidifier
Whirlpool AD025SJ0 Dehumidifier
Whirlpool AD040SG0 Dehumidifier
Whirlpool AD040SJ2 Dehumidifier
Whirlpool AD050SG0 Dehumidifier
Whirlpool AD050SJ2 Dehumidifier
Whirlpool AD25BBK0 Dehumidifier
Whirlpool AD25BBL2 Dehumidifier
Whirlpool AD25BBL3 Dehumidifier
Whirlpool AD25BBL4 Dehumidifier
Whirlpool AD25BBL6 Dehumidifier
Whirlpool AD25BBL7 Dehumidifier
Whirlpool AD25BBL8 Dehumidifier
Whirlpool AD25BBR0 Dehumidifier
Whirlpool AD25BBR1 Dehumidifier
Whirlpool AD25BSR0 Dehumidifier
Whirlpool AD25BSS0 Dehumidifier
Whirlpool AD25CH0 Dehumidifier
Whirlpool AD25DSS0 Dehumidifier
Whirlpool AD25DSS1 Dehumidifier
Whirlpool AD25G0 Dehumidifier
Whirlpool AD25G1 Dehumidifier
Whirlpool AD25GO Dehumidifier - DEHUMIDIFIER
Whirlpool AD25J0 Dehumidifier