Models > AD25DSS0

AD25DSS0 Whirlpool Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for AD25DSS0

Viewing 3 of 3

Manuals & Guides for AD25DSS0

Click to download
Keep searches simple, eg. "belt" or "pump".
$7.95
11-16 x 3/4 Sold individually.
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
This part is used to prevent water overflow when the bucket gets full.
In Stock
Order within the next 7 hrs and your part ships today!
$7.95
In Stock
Order within the next 7 hrs and your part ships today!
$59.87
Special Order
No Longer Available
$41.87
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
No Longer Available
$8.04
In Stock
Order within the next 7 hrs and your part ships today!
$49.53
In Stock
Order within the next 7 hrs and your part ships today!
$40.73
In Stock
Order within the next 7 hrs and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    James from Silver Bay, MN
  • Parts Used:
    WP1168670
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original failed humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    larry from tampa, FL
  • Parts Used:
    WP1168670
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Charles from So. Orleans, MA
  • Parts Used:
    1188415
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
broken plastic wheel on dehumidifier so it wouldn't stand up straight.
I was able to pull the old wheel off and then went to google on the computer and put in whirlpool dehumidifier. I was directed to a website where I could put in the model # of the appliancew and then was able to view pictures of repair parts. I was able to view the actual caster and determine that I was ordering the right one. The part came about 3 days later and I was able to snap it on without using any tools. There was alittle plastic guide to hold aside and slide the new caster in place.
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!