Models > AD25BBL8

AD25BBL8 Whirlpool Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for AD25BBL8

Viewing 3 of 3

Manuals & Guides for AD25BBL8

Click to download
Keep searches simple, eg. "belt" or "pump".
$8.04
In Stock
$9.56
Part may differ in appearance, but functions same as original.
In Stock
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
In Stock
$7.76
Sold individually.
In Stock
This part is used to prevent water overflow when the bucket gets full.
In Stock
$276.27
This fan motor controls the circulating fan in the dehumidifier.
Special Order
No Longer Available
$8.04
In Stock
Also known as wheel or roller. This part is sold individually.
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    James from Silver Bay, MN
  • Parts Used:
    WP1168670
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original failed humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    larry from tampa, FL
  • Parts Used:
    WP1168670
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steven from Owings Mills, MD
  • Parts Used:
    WP1172075
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
the dehumidifier was not shutting off when water level was full
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!