OEM Sterling Grill Parts & Accessories

Grease Pan

$9.79

Fix Number: FIX10283396
Manufacturer Part Number: 22009-901

This metal grease pan is an original part sourced directly from Broil-Mate for use with gas grills. The pan is used to collect excess grease that is produced when cooking and allows for easy cleanup. Please check the appropriate diagrams for your model for the correct location and application of this part. One item is included per order.

GREASE TRAY PORC FORMED 440 +

$20.72

★★★★★

1 Review

Fix Number: FIX19027528
Manufacturer Part Number: 27055-901

Bolt 1/4-20 x 1/2

$6.51

Fix Number: FIX10283195
Manufacturer Part Number: Y-12865

Electronic Ignitor

$8.70

Fix Number: FIX10282625
Manufacturer Part Number: 10342-244

This replacement electronic ignitor is specially designed use with for Broil-Mate gas grills. It is supplied directly from original equipment manufacturer. This part has a plastic body and it is sold individually. Igniter produces the spark to ignite the burner. It requires a "AAA" battery which is sold separately. Replacing this electronic ignition module is easy and does not require any tools • Disconnect the wires from the old module • Unscrew the button that holds it to the unit • Place a new module in place • Install the battery and secure the module with the button • Re-connect the wires

COLLECTOR BOX BOTTOM FRONT 5B

$14.16

Fix Number: FIX19027398
Manufacturer Part Number: 22026-903

Stainless Steel Heat Plate

$21.68

Fix Number: FIX12031824
Manufacturer Part Number: 18431

This Flav-R-Wave is an OEM approved replacement part for select models of Sterling, Huntington, Broil-Mate, and Broil King grills, to ensure this part is compatible with your grill, please see the "Model Cross Reference List" below. The primary purpose of the Flav-R-Wave is to protect your burners from food and debris, as well as to provide that smoky BBQ flavor by creating smoke when drippings fall on them. The dimensions of this part are 15.87" x 5.8", and it should be replaced when it begins to show signs of wear or damage. It is sold individually, made of porcelain-coated steel, and should be cleaned regularly. It may also be referred to as a Heat Diffuser, Heat Plate, Heat Tent, Flame Tamer, or a Heat Sheild.

Installation Instructions

Bryce from JACKSONVILLE, FL

The heat dispersion plates completely rusted out did that there was basically 4 hotspots on the grill.

Step 1: Removed rusted out plates and cleaned grill.
Step 2: Installed new plates. Read more...

Electrode

$6.51

Fix Number: FIX10283279
Manufacturer Part Number: 10342-E12

This is an authentic OEM supplied replacement part that is specially made for Broil-Mate gas grills. The purpose of an electrode is to provide the spark that ignites the gas. If the burner won\'t light, first clean the electrode and check that it\'s aligned. If the problem persists, replace the igniter electrode. Please note one durable metal and ceramic electrode is included per order.

6-in. Wheel

$6.51

Fix Number: FIX10371349
Manufacturer Part Number: 10892-608

It is a genuine manufacturer sourced replacement 6-in. wheel that is specially designed for gas grills. This is the wheel that supports and helps to move your mower around. It is made from durable plastic and it is sold individually, please note the hardware to secure it is sold separately.

Ignitor

$8.70

★★★★★

1 Review

Fix Number: FIX10283275
Manufacturer Part Number: 10342-245

This replacement ignitor assembly is a genuine Broil-Mate part. It is specially sourced from original equipment manufacturer for use with gas grills. Igniter makes ignition process simple and safe by producing the spark to ignite the burner with only a push of a button. It has a plastic body and it is sold individually. Please note, it does require a "AAA" battery which is sold separately. Replacing this ignitor is an easy task that does not require any tools. • Unplug the wires from the old ignition module • Unscrew the button that holds it to the unit • Place a new module in place • Install a "AAA" battery and secure the module with the button • Re-connect the wires

Bolt 1/4-20 X 3/4

$6.51

Fix Number: FIX10283177
Manufacturer Part Number: Y-11981

This part is an OEM from Broil King. The metal bolt (1/4-20 x 3/4) is compatible with several Broil King grills. This item is sold individually. Please refer to the manual for the specific application of the bolt.

Sterling Grill Parts

Popular Sterling Grill Parts

Installation Instructions

Sterling Grill Appliance Types

Popular Sterling Grill Models

Sterling Grill Parts

Start With Your Model Number

Popular Sterling Grill Parts

Installation Instructions

Sterling Grill Appliance Types

Popular Sterling Grill Models