Official Amana Washer Seals and Gaskets

Front Load Washer Bellow

$132.64

Fix Number: FIX12074757
Manufacturer Part Number: W11106747

If your front-load washer is leaking, the door gasket might be the problem. This gray rubber seal wraps around the door opening to keep water inside and protect the machine’s inner parts. It’s easy to replace—just peel off the old one and press the new one into place. This part is sold on its own, so if you need a clamp, you’ll want to grab that separately.

Fixes these symptoms

Draining Issues
Leaking
Marks left on clothes
See more...

Bellow

$167.32

Fix Number: FIX12711495
Manufacturer Part Number: W11314648

This washer door boot seal fits select Whirlpool, Maytag, Amana, and KitchenAid front-load washers. It prevents leaks by sealing the gap between the door and tub and helps reduce noise and vibration during the spin cycle. Made from durable rubber or silicone, it’s ideal for replacing cracked or worn seals. Be sure to confirm compatibility with your model before installation.

Fixes these symptoms

Leaking
See more...

Watch the install video

Front Load Washer Bellow Door Boot Seal - Gray

$112.29

★★★★★

3 Reviews

Fix Number: FIX11753988
Manufacturer Part Number: WPW10381562

If your laundry is coming out of the washer with marks or tears, your washer is leaking, or there is a burning smell, there may be an issue with your door bellow. This genuine OEM part is also called a boot seal and provides a watertight seal around the door of your front load washing machine. If the door boot seal gets damaged or torn, it can cause leaking to happen and should be replaced. A common reason that the bellow gets torn is overloading the machine. There are two clamps that hold the bellow in place, if they are in good shape they can be reused with the new bellow. If the clamps are damaged, they should be replaced and can be purchased separately.

Fixes these symptoms

Leaking
Marks left on clothes
See more...

Watch the install video

Centerpost Gasket

$7.60

Fix Number: FIX11723081
Manufacturer Part Number: W10814296

Stop leaks before they start with this outer tub seal. It fits between the tub and base to keep water inside where it belongs. At about 2 inches across, this sturdy black gasket is built to last. Installing it takes some work—you’ll need to unplug the washer, disconnect hoses, and remove the tub—but replacing a worn seal now means fewer leaks and better performance later.

Fixes these symptoms

Leaking
See more...

Watch the install video

Washer Door Bellow

$130.59

Fix Number: FIX11744957
Manufacturer Part Number: WP8182119

This door boot seal serves as the primary gasket between the front bulkhead and the outer tub of your washing machine, ensuring a watertight barrier during operation. It prevents water leakage and supports proper drum function by maintaining a secure seal. Over time, the seal may wear, tear, or become misshapen, leading to leaks or performance issues. This replacement part is sold without clamps, which must be ordered separately if needed. For best results, verify compatibility with your appliance model before installation.

Fixes these symptoms