Washer Dryer Combo Switches

Dryer Door Switch

★★★★★

★★★★★

11 Reviews

This OEM dryer door switch is an on/off mechanism that detects when the door is open to prevent the dryer from operating. If your dryer will turn on but will not start or continues working while the door is open, you may have a faulty door switch. This part features the switch and three wires, is white in color, and measures 6.5 inches long. This switch replaces the two-wire switch that is on many models. You will find this part attached to the inside of the top end of the front panel. One end attaches to the wiring harness and the other goes through the panel to make contact with the door when the door is closed. This is a regular wear part due to such frequent use or continuous harsh handling. Depending on how the switch broke, it might make it impossible to start or stop your drying cycle. You can test the function of this part by pushing on the black tab that sticks out of the front panel to make contact with the dryer door. If there is no resistance in the tab and it does not make a clicking sound, it likely needs to be replaced.

Front Load Washer Door Lock and Switch Assembly

★★★★★

★★★★★

1 Review

This door lock and switch assembly is an authentic OEM replacement part for your front load washing machine. The lock is used to prevent the door from opening while the machine is running, and the switch indicates that the door is closed, allowing the washer to begin its wash cycle. Attempting to open the washer door while it is still locked can cause damage to these parts. If your washer door will not open, close, or lock, you may need to replace the lock and switch. Please be sure to disconnect the power supply to your washer before beginning this repair.

Push-to-Start Switch This push-to-start switch is a genuine OEM part and is used to activate your dryer. If your dryer will not start, or will only start if the switch is pushed down, or the timer knob is not engaging with the starter, you may need to replace the switch. The tools you will need to replace this part are a Phillips screwdriver and a flat blade screwdriver. Please be sure to disconnect the power supply to your dryer before beginning this repair.

Push-To-Start Switch

★★★★★

★★★★★

1 Review

The push-to-start switch is a genuine OEM part for your dryer. When the button is pressed and released, it activates the dry cycle for your laundry. If your dryer will not start or it shuts off too soon, there may be an issue with the start switch and it should be replaced. Please be sure to disconnect the power supply to your dryer before beginning this repair, as you will be working with electrical components.

Push-to-Start Switch

★★★★★

★★★★★

1 Review

This push to start switch is an authentic OEM replacement part for your dryer. Once a setting has been selected on the timer, the switch is then used to complete the circuit and start the cycle. If your dryer will not start, you may need to replace the switch. You can use a multimeter to test if the switch is faulty. Please be sure to disconnect the power supply to your dryer before replacing this part.

Interlock Switch This interlock switch is a genuine OEM part that can be used in a variety of appliances like dishwashers and dryers. The switch is also known as a belt switch and works as a simple on and off mechanism. The switch is used to stop the appliance from operating if the door has been opened. If your appliance continues to run even once the door has been opened, the interlock switch may have failed. Please be sure to disconnect the power source to your appliance before beginning this repair.

Door Switch A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Door Switch Kit

★★★★★

★★★★★

1 Review

This part replaces older two terminal switches.

Lid Switch This 3 prong lid switch is used for washing machines that do not have a tub light.

Door Switch