OEM Tappan Wall Oven Parts & Accessories

Watch the install video

$19.73

Light Bulb

Fix Number FIX12751166

Manufacturer Part Number 316538904

Clear, 120 Volt, 40 Watt.

Installation Instructions

Chris from Lillington, NC

Broken bake element & light bulb

Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb. Read more...

$35.86

Flat Style Oven Igniter

Fix Number FIX470129

Manufacturer Part Number 5303935066

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Installation Instructions

Mary from Ticonderoga, NY

When turning on the oven, it would not ignite.

Unplug the power.Took off the broiler door . Reached in , unscrewed the two screws holding the igniter (one screw was stripped so that gave me a little problem) put on the new igniter. Stripped the wires & put the caps on. Plugged back in the stove & worked great. Read more...

Watch the install video

$10.90

LENS

Fix Number FIX16218465

Manufacturer Part Number 5304524341

This is a light bulb lens, and it is made for your oven. This part protects the light bulb inside your oven by covering it. The lens is made of glass, and has a 3-inch diameter. Before making this repair, we recommend disconnecting the power.

Installation Instructions

Boyd from Birmingham, AL

Lens broken

Removed snap wire holding old lens in place, replaced bulb then centered new lens in place and put snap wire on new lens. Job done in 2 minutes. Easy as eating apple pie. Read more...

Watch the install video

$9.37

Main Terminal Block Kit

Fix Number FIX471605

Manufacturer Part Number 5304409888

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

$148.35

Bake Element

Fix Number FIX978772

Manufacturer Part Number 318255101

This bake element is found on the bottom of the oven.

Fixes these symptoms

Element will not heat
Little to no heat when baking
See more...

Watch the install video

$46.58

Oven Light Socket

Fix Number FIX439060

Manufacturer Part Number 316116400

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Stan from Salmon, ID

Burned out

Pulled the socket out on the door side, pushed the new socket in the old hole, hooked up the wires, screwed in the bulb. It worked, that is all it had to do. Read more...

Watch the install video

$68.24

Broiler Pan Grate Insert

Fix Number FIX9864838

Manufacturer Part Number 5304494997

This includes pan and insert.

Watch the install video

$50.31

Temperature Sensor

Fix Number FIX820208

Manufacturer Part Number 316217002

This is a temperature sensor for a range. The sensor is what detects the temperature inside the oven and is often replaced when the oven is having heating issues. Please note that the wire connector may be different from the original; if this applies to your part, cut the quick connect and wire together with porcelain wire nuts. For this DIY repair, you will need a Number 2 Phillips or Number 2 square-head screwdriver and possibly wire strippers. Make sure to disconnect the power before installing this part. You will need to pull the range from the cabinet to gain access to this part from the back of the unit.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Stephen from Ormond Beach, FL

Oven not heating to the set temperature

Suspected sensor based on above problem. The biggest problem was not knowing how hard it would be to get the built-in oven from its slot. Once it moved an inch, it was easy. The sensor inside the oven is a little hard to access because of the oven door. I would recommend a magnetic screw driver to make it easy to hold the sensor screws and allow reaching in the oven with one hand. Read more...